Mobile
Log In Sign Up
Home > english-chinese > "闭管" in Chinese

Chinese translation for "闭管"

stopped pipe; closed tube [pipe]

Related Translations:
闭果:  indehiscent fruit
闭核:  closed kernel
闭集:  [数学] closed set; topologically closed set
闭珊瑚:  pycnactis
气闭:  airmassclosed qiqi blockageqi-stagnant dysuria
闭伟:  bi wei
闭轨道:  closed orbit
围闭:  enclose
闭膜:  closing membrane
箝闭:  impactionincarceration
Example Sentences:
1.Closed ampoule vacuum diffusion
闭管真空扩散
2.Laser induced diffusion is performed within a non - homogenous 4 - d temperature field , which is different with the normal closed - ampoule diffusion in a homogenous and steady temperature field
与常规闭管扩散的均匀恒定温度场不同,激光诱导扩散是在四维( x , y , z , t )非均匀温度场中进行。
3.With the development of doping technology , the formation of the base region in high - voltage transistor can be made by b diffusion technology , b - a1 paste - layer diffusion technology , close - tube ga - diffusion technology and open - tube gallium - diffusion technology
随着掺杂工艺的不断发展,高反压晶体管基区的形成经历了扩硼工艺、硼铝涂层扩散工艺、闭管扩镓工艺到开管扩镓工艺的发展。
4.At the initial stage of planar technique , b was employed as ideal diffusion impurity in base - region of npn si planar devices because of the match of its solid - solubility and diffusion coefficient in si with those of p in emission - region , and the good shield effect of sio2 film to b . but because of the relatively large solubility ( 5 1020 / cm3 at 1000 ) and the small diffusion coefficient , the linear slowly - changed distribution of acceptor b in pn junction can not be formed , which could not cater to the requirement of high - reversal - voltage devics . thereafter b - a1 paste - layer diffusion technology and close - tube ga - diffusion technology had been developed , while the former can lead to relatively large the base - region deviation and abruptly varied region in si , which caused severe decentralization of current amplification parameter , bad thermal stability and high tr ; the latter needed the relatively difficult pack technique , with poor repeatability , high rejection ratio , and poor diffusion quality and productio n efficiency
在平面工艺初期,由于b在硅中的固溶度、扩散系数与n型发射区的磷相匹配, sio _ 2对其又有良好的掩蔽作用,早被选为npn硅平面器件的理想基区扩散源,但b在硅中的固溶度大( 1000时达到5 10 ~ ( 20 ) ,扩散系数小, b在硅中的杂质分布不易形成pn结中杂质的线性缓变分布,导致器件不能满足高反压的要求,随之又出现了硼铝涂层扩散工艺和闭管扩镓工艺,前者会引起较大的基区偏差,杂质在硅内存在突变区域,导致放大系数分散严重,下降时间t _ f值较高,热稳定性差;后者需要难度较大的真空封管技术,工艺重复性差,报废率高,在扩散质量、生产效率诸方面均不能令人满意。
Similar Words:
"闭关自守" Chinese translation, "闭关自守的" Chinese translation, "闭关自守的社会" Chinese translation, "闭关自守经济" Chinese translation, "闭关自守政策" Chinese translation, "闭管法" Chinese translation, "闭管分析" Chinese translation, "闭管海水温度表" Chinese translation, "闭管扩散" Chinese translation, "闭管试验" Chinese translation