Chinese translation for "热循环加载"

thermal cycle loading

Example Sentences:

	1.	3 . the anand model , a unified viscoplastic constitutive relation , was applied to represent the nonlinear deformation behavior of 63sn37pb solder 3 .采用anand统一型粘塑性本构模型对63sn37pb焊点钎料在热循环加载下的应力应变进行模拟。
	2.	To our knowledge , for real flip chip packaging under the thermal loading , the paris equation obtained from experiment da / dn and simulation g is firstly reported here , and will be useful practically 本文在热循环加载条件下对实际倒装焊封装给出实验da / dn和模拟g关系的paris方程，属首次报导。
	3.	2 . the delamination at the interface is one of typical failure mode for electronic packaging . in order to get more understanding of the propagation behaviour of [ he delamination , a series of finite element simulations related were done 为了对界面分层及其传播行为进行深入研究，本文对b型和d型两种实验倒装焊封装，在热循环加载下，进行了有限元模拟。
	4.	Finite element method ( fem ) was used to simulate thermal and vibration problems in stacked - die csp assembly . finite element models and apdl programes were built in ansys to conduct thermal , thermal - mechanical and vibration analysis . the aim of these researches were trying to find some possible reasons and trends which affect the reliability of stacked csp / bga assembly and give some useful suggestions for the packaging design 本论文正是针对以上情况,以采用引线键合工艺的三维叠层csp / bga封装(裸芯片叠装)为研究对象,在有限元分析软件ansys中建立相关的有限元模型,编制了相应的apdl参数化分析程序,进行了温度场分析、热循环加载下的snpb合金焊点疲劳分析和实装pcb板的振动模态分析。

Similar Words：

"热循环的" Chinese translation, "热循环发电站" Chinese translation, "热循环法" Chinese translation, "热循环风洞" Chinese translation, "热循环恒温箱" Chinese translation, "热循环可靠性" Chinese translation, "热循环模拟装置" Chinese translation, "热循环尿素工艺" Chinese translation, "热循环试验" Chinese translation, "热循环试验方法" Chinese translation