| 1. | Crankshaft dimension calculation module ' s development of reciprocating pump
往复泵曲轴特征尺寸计算模块开发 |
| 2. | Department of computer science , university of science and technology of china , hefei 230027 , p . r . china - 1mm
随着集成电路工艺的发展，特征尺寸不断缩小，相邻金属导线间的耦合日益显著。 |
| 3. | The submicron ring , laser beam shaper and fresnel lens is fabricated by ion etching according to the selected parameter
依照这些参数刻蚀出了高质量的特征尺寸为亚微米的环、光束整形元件和菲涅耳透镜等元件。 |
| 4. | Its usages in today ' s computer , communication , and consumer electronics are wider and more popular . this thesis first describes the structure and operational principle of a sram
随着工艺水平的不断提高，器件特征尺寸不断减小，从而使得sram在容量不断增大的同时性能也在不断改善。 |
| 5. | The subwavelength optical elements with features smaller than the wavelength of the incident illumination do not give rise to diffraction other than the zeroth orders in the substrate and incident medium
亚波长光学元件的特征尺寸小于入射光波波长，特点是仅有零级反射波和透射波存在。 |
| 6. | Following the enhancement of process technology , the feature size of device becomes smaller , which make the density of flash memory and at the same time performance improved
随着工艺水平的不断提高，器件特征尺寸不断减小，从而使得flashmemory在容量不断增大的同时性能也在不断的改善。 |
| 7. | Micro electro mechanical systems , mems , is a class of systems that are physically small , with dimensions in the micron ( 10 - 6meters / micron ) range . these systems have both electrical and mechanical components
微电子机械系统是由特征尺寸在亚微米至毫米范围内的电子和机械元件组成的微器件或微系统。 |
| 8. | The basic purpose of these correction methods is to manufacture smaller cds using existing equipments and to preserve functional correspondence between the designed circuit and the manufactured circuit
这些校正方法的基本目的都是为了在已有的生产工艺设备基础上制造出更小的特征尺寸，以使硅片上得到的图形和设计的版图相一致。 |
| 9. | With the rapid growth of wireless communication markets , si rfic is recognized as a fascinating candidate to meet the demands of low - cost , high integration , and mature technologies
近年来，随着特征尺寸的不断减小，深亚微米cmos工艺其mosfet的特征频率已经达到50ghz以上，使得利用cmos工艺实现ghz频段的高频模拟电路成为可能。 |
| 10. | The phenomenon named " generalized resonance " corresponding to the characteristic dimensions of the antennae and the array has also been found which can only be shifted out of the band by adjusting the characteristic dimensions
同时发现，对应对称振子和天线阵的特征尺寸出现了"广义谐振"现象，这种现象的消除只能通过改变系统的特征尺寸来实现。 |
