Mobile
Log In Sign Up
Home > chinese-english > "烧结气氛" in English

English translation for "烧结气氛"

sintering atmosphere

Related Translations:
宴会始终充满亲切友好的气氛:  the banquet was full of cordial and friendly atmosphere from beginning to end
脉冲烧结:  pulse sintering
烧结理论:  theory sintering
扩散烧结:  diffusion sinteringdiffusion-sintering
烧结阴极:  sintered cathode
烧结白云石:  burnt dolomiteclinkered dolomitedolosetsintered dolomite
烧结饼:  agglomerated cakesinter cake
烧结膨胀:  clinkering expansionsintering swell
烧结焙烧:  agglomeration roastingsinter returns roastingsinter roasting
烧结技术:  sintering technique
Example Sentences:
1.Hardness increased and electrical conductivity decreased after adding fe to the composites
材料的组织和性能随着烧结气氛的改变而有所不同。
2.The process of organic vehicle evacuation of aln green tape and ag conductor paste have been researched in the view of ltcc technology , and optimum condition of organic vehicle evacuation temperature and cofiring atmosphere have been determined
摘要从低温共烧的工艺角度来研究氮化铝坯片和银浆的排胶,从而确立排胶的温度及烧结气氛的控制。
3.The raw materials , the composition , the time of milling , the calcining temperature , the different additives , the sintering temperature and the sintering parameters were investigated . the result showed : it was advantaged to obtain high initial permeability mnzn ferrite with stable frequency characteristic using high - purity raw materials ; in order to obtain mnzn ferrite with high properties , we must control strictly the composition ; it could improve the properties of mnzn ferrite by optimizing calcining temperature . the lower calcining temperature made the permeability higher , and the higher calcining temperature could promote the frequency characteristic of permeability ; we chosen the right time of milling according to the requirement of power diameter ; in order to improve the properties of mnzn ferrite , it is necessary to add effective additives . in this dissertation , the influence of bi2o3 、 moo3 、 k2co3 、 co2o3 were investigated ; the sintering temperature , the time of heat - retaining and sintering parameters were the key factors of preparing high permeability mnzn ferrites
研究结果表明:采用高纯度的fe2o3有利于获得高起始磁导率且频率特性优良的铁氧体;为了制备所需性能的铁氧体,需要严格控制配方中各种原材料的含量,优化配方;由于粉体活性受预烧条件的影响,所以对不同要求的铁氧体选择的预烧条件就不一样,适当降低预烧温度有利于获得较高的起始磁导率,而为了获得良好的频率特性可以适当地提高预烧温度;根据对粉体颗粒粒径的不同需求,可以选择不同的球磨时间;而有效的添加剂是改善材料性能的必要条件,本文在添加剂的研究中主要对bi2o3 、 moo3 、 k2co3 、 co2o3的影响分别作了详细地讨论;烧结温度、保温时间和烧结气氛是高磁导率mnzn铁氧体制备最关键的工艺,适宜的烧结工艺可以获得理想微结构和组成,从而得到高性能的铁氧体材料;而从材料的微结构上来看,要提高材料的截止频率,就要适当地细化晶粒、增加晶粒内部的气孔。
4.Abstract : this paper has deseribed the principles of preparation and technological process about nitrogen - based sintering atmosphere by ammonium cracked and burnt . the chemical effect in sintering furnace is discussed . the effects of it on the carbon content of the iron base structure materials were studied . the superior feature and technical & economic value in saving energy , in cutting down the consumption of raw materials , in waking use of natural resources , in environmental protection , in safety , etc . , have been brought to light
文摘:叙述了氨分解燃烧氮基烧结气氛的制备原理与流程设计;探讨了它在烧结炉中的化学效应;研究了它对铁基结构材料碳含量与性能的影响;揭示了它用于粉末冶金铁基结构件烧结时,在节能、降耗、资源利用、环保、安全等方面的优势特征与技术经济价值。
5.The experimental data has been used to validate pdm and low temperature sintering mechanics . the advantage and disadvantage of pdm have been discussed also . for the first time , the pdm is used to study the low temperature sintering mechanics of uo _ 2 , and the research results indicate : 1
3 、基于烧结颈长大速率与致密化动力学方程得出,影响二氧化铀低温烧结的因素有原始粉末粒径、粉末堆积方式、坯块原始密度、烧结温度、烧结时间、烧结气氛等;粉末压坯一定时,烧结温度、烧结时间和烧结气氛就成为控制低温烧结的关键因素。
6.Based on analyzing sintering and infiltration processes , the effect of infiltration temperature on microstructure and properties of the material was studied when the ratio of w - cr , the porosity of green compact and the sintering process of w - cr skeleton were fixed . the differences of microstructure and properties of the composites with different composition were investigated by same sintering and infiltration processes . the composites were prepared in h2 , n2 , ar and vacuum conditions respectively
基于对wcr cu复合材料的烧结和熔渗过程的分析,研究了cr - w配比、压坯紧实率、骨架烧结工艺相同的情况下,不同熔渗温度对材料的组织形貌和性能的影响;研究了烧结-熔渗工艺相同的情况下,不同配比对材料组织和性能的影响;研究了h _ 2 、 n _ 2 、 ar和真空四种烧结气氛下材料组织和性能的变化。
Similar Words:
"烧结坯块" English translation, "烧结皮带通廓" English translation, "烧结铺底料" English translation, "烧结普通砖" English translation, "烧结砌块" English translation, "烧结气孔率" English translation, "烧结气体转化器" English translation, "烧结腔体" English translation, "烧结青铜" English translation, "烧结青铜过滤片" English translation