| 1. | Tinned copper clad wire for electronic components
电子元器件用镀锡铜包钢线 |
| 2. | Tin - caoted copper - clad steel wire
镀锡铜包钢线 |
| 3. | Introduction cl21x are non - inductively wound with metallized polyester film as the dielectric electrode with copper - clad steel leads and epoxy resin coating
Cl21x为无感结构，用金属化聚酯膜作电介质电极绕制而成，导线采用镀锡铜包钢线，使用环氧树脂包封。 |
| 4. | Introduction cl21s are non - inductively wound with meatllized polyester film stacked as the dielectric electrode with copper - clad steel leads and epoxy resin coating
Cl21s为无感结构，用金属化聚酯膜作电介质电极绕制而成，导线采用镀锡铜包钢线，使用环氧树脂包封。 |
| 5. | Cbb81 are non - inductively wound with polypropylene film as the dielectric and aluminum foil as the electrode with copper - clad steel leads and epoxy resin coated
Cbb81为无感结构，用聚丙烯膜作为电介质和铝箔为电极卷绕而成，导线采用镀锡铜包钢线，使用环氧树脂包封。 |
| 6. | Introduction cl20 are non - inductively wound with metallized polyester film as the dielectric electrode and copper - clsd steel leads and outer wrapping of polyester end sealed with epoxy resin
Cl20为无感结构，用金属化聚酯膜作电介质电极绕制而成，导线采用镀锡铜包钢线，使用环氧树脂密封。 |
| 7. | X1 - mex are non - inductively wound with metallized polypropylene film as the dielectric electrode with copper - clad steel leads and encapsulated in a plastic case sealed with epoxy resin
X1 - mex为无感结构，用金属化聚丙烯膜作为电介质电极绕制而成，导线采用镀锡铜包钢线，使用环氧树脂密封在塑料壳内。 |
| 8. | Introduction cl21 - b are non - inductively wound with metallized polyester film as the dielectric electrode with copper - clad steel leads and encapsulated in a plastic case sealed with epoxy resin
Cl21 - b为无感结构，用金属化聚酯膜作电介质电极绕制而成，导线采用镀锡铜包钢线，使用环氧树脂密封在塑料壳内。 |
| 9. | Cbb88 are non - inductively wound with polypropylene film as the dielectric and aluminum foil as the electrode with copper - clad steel leads and encapsulated in a plastic case sealed with epoxy resin
Cbb88为无感结构，用聚丙稀膜作为电介质和铝箔为电极绕制而成，用镀锡铜包钢线引出，使用环氧树脂密封在塑料壳中。 |
| 10. | Introduction cbb21 - b are non - inductively wound with metallized polypropylene film as the dielectric electrode with copper - clad steel leads and encapsulated in a plastic case sealed with epoxy resin
Cbb21 - b为无感结构，用金属化聚丙稀膜作为电介质电极绕制而成，导线采用镀锡铜包钢线，使用环氧树脂密封在塑料壳内。 |
