| 1. | Preparation of mullite sol and mullite sol coated aluminum titanate powder
莫来石溶胶的制备及对钛酸铝粉体的包裹 |
| 2. | Alumina titanate ceramics
钛酸铝陶瓷 |
| 3. | Study on the preparation of al2tio5 gel via nonhydrolytic sol - gel route using alcohols as oxygen donor
凝胶法制备钛酸铝凝胶的研究 |
| 4. | Study on the aluminum titanate ceramics matrix composite reinforced by carbon fiber electroless plated
化学镀碳纤维增强钛酸铝基复合材料的研究 |
| 5. | Through investigating the sinter process of al2o3 and at composite , the sinter parameters of atio5 / al2o3 is obtained
通过对钛酸铝与氧化铝的烧结研究，进一步确定了钛酸铝氧化铝梯度复合材料的烧结工艺制度。 |
| 6. | According to us , it is the first time that aluminum titanate with zero decomposition ratio was compounded by using single mgo additive
据我们所知，这是首次在使用单一mgo添加剂的情况下制备出零分解率的钛酸铝。 |
| 7. | Based on the study of the abtio5 / al2o3 composite , the finite element method is use to relax residual thermal stresses and design the structure
在此基础上，采用有限元方法对钛酸铝氧化铝梯度材料进行了热应力缓和与结构设计。 |
| 8. | If appropriate m2t is introduced , the composite can also obtain fine thermal properties . when the content of m2t is 10mol % , the thermal expansion coefficient is - 0 . 45x10 - 6 /
同时引入适量钛酸镁，钛酸铝烧结体的热膨胀系数仍然很低，钛酸镁的含量为10mol时其热膨胀系数为- 0 . 45 10 ~ ( - 6 ) 。 |
| 9. | The main purpose of the study is to prepare aluminum titanate ( al2tio5 / at ) fine powder with good thermal stability . improving the thermal stability of aluminum titanate synthesized by using single mgo additive is emphasized
本论文研究的主要目的是合成出具有良好热稳定性的微细钛酸铝粉体，重在提高使用单一mgo添加剂稳定钛酸铝的能力。 |
| 10. | The value of these new discovers lies in that they supply a new considering basis for developing synthesizing technology of at with concurrent high thermal stability and strength and for researching thermal stability mechanism of at
本研究获得的这些新发现的价值在于，它们为发展兼容热稳定性和强度的钛酸铝粉体的合成技术、研究钛酸铝的热稳定性制约机理提供了新的考虑基点。 |
