| 1. | Condition of mass flow continuity
质量流动连续条件 |
| 2. | Direct imposition of essential boundary and material discontinuity conditions in the meshless method
在无单元法里直接准确施加位移边界条件和材料不连续条件 |
| 3. | The given solution satisfies all fundamental equations of elasticity and continuity conditions between the laminates
此解满足层合板的基本方程和层间连续条件。 |
| 4. | Secondly , using the perfectly bonded contact conditions between the layers , the delivery matrix between the electro - elastic layer and normal layer is worked out
再由层间连续条件，计算由压电层到一般层的传递矩阵。 |
| 5. | In this paper , the reasonable measures of stress and strain and the right expression of geometric equation and continuity condition are pointed
对于欧拉表达式中的几何方程和连续条件，文中指出应采用合理度量及正确表达式。 |
| 6. | By the use of the continuity conditions at the layer interfaces , the general solution formulation of multilayered axisymmetric space magneto - electro - elastic media is given
根据层间完全接触的连续条件，由传递矩阵方法导出了多层压电压磁弹性材料空间轴对称问题的一般解析式。 |
| 7. | The aims of this thesis are researching some typical nurbs surfaces " geometric continuous conditions and pointing out the effects of knot vector and the degree of surface on geometric continuities
本文的目的是研究一些典型的nurbs曲面的几何连续条件，指出节点向量和曲面片的次数对几何连续性的影响。 |
| 8. | If the soil around the pile includes several layers , we suppose each layer is well distributed . and we build equation for each layer . then we get all equations together
对于多层土的情况，假定每层土均质，分别对各土层建立方程，联立各方程则可得到整个土层的方程组，然后根据土层界面的连续条件和边界条件，可解得负摩阻力。 |
| 9. | With the aid of the obtained fundamental solutions and the continuity conditions of stress and displacement on material interface , complex potentials solutions for an bi - material infinite plate with an elliptical inclusion under pulling stress are given
根据界面上应力和位移的连续条件，得到了单向拉伸状态下，含有椭圆夹杂的无限大双材料组合板的复势解。 |
| 10. | Basing on the research of the geometric continuous condoition of two patches , this paper gives a method for merging two bezier surfaces with the construction of transition band which improves the result of liu ding - yuan and hu kang - sheng
摘要在研究两曲面片间几何连续条件基础上，给出了运用构造过渡曲面片来光滑地连接两相邻曲面片的一种方法，所得结果是对刘鼎元，胡康生等研究成果的改进，并给出了本算法的试验结果。 |
