| 1. | Automatic connection handling
自动化的连接处理： |
| 2. | There is one significant difference between disconnected processing in ado and ado . net
Ado和ado . net中的不连接处理之间存在一个显著差异。 |
| 3. | You can see the part of the generic connection framework that enables http connection handling
中，可以看到支持http连接处理的那部分通用连接框架。 |
| 4. | Automatic connection handling provides the ability to connect , disconnect , and manage system resources
自动化连接处理能够连接、断开和管理系统资源。 |
| 5. | The classical r - tree as index is adopted in spatial joining . r - tree is performed by bulk loading
在空间连接处理的算法上采用了经典的r树作为索引，采用批生成算法生成r树。 |
| 6. | In case protection inputs / outputs are required from one logic to another , they can be soft - wired , provided they are on the same processor
两个逻辑(元件)在同一处理器上，若彼此需要保护输入/输出时，可软连接处理。 |
| 7. | Column , i ll introduce you to the three variations of the factory pattern and then show you how it enables connection handling in the midp 2 . 0 generic connection framework
专栏中，我将介绍工厂模式的三种变体，然后展示如何在midp 2 . 0通用连接框架中工厂支持连接处理。 |
| 8. | The results indicate whether the distribution of mass and the joint of every component are reasonable for the whole frame structure with long distance and multiple elastic bracings will have a relatively great impact on the dynamical performance of the whole structure
计算结果表明了对于这种长距离多弹性支撑的整体钢架结构,其质量分布与各部件的连接处理是否合理,对整体结构动态性能影响较大。 |
| 9. | Secondly we use canny arithmetic operators to get the edge of image , and remove the short link of edge then link the edge with small clearance . at last we can calculate the distance of conductor and the width of conductor according to the grade direction to detect of defect of the circuit boards
然后选用canny算子提取导线边缘，并对边缘进行短分支去除和边缘连接处理，最后根据梯度方向来计算导线间距离和导体宽度，以此来判断电路板缺陷。 |
