Chinese translation for "进样口"

injection port

Example Sentences:

	1.	If using a split / splitless inlet , check that the purge valve is on 如果使用分流/不分流进样口，检查分流阀是否打开。
	2.	Clean the injector port , replace critical injection port seals , replace injection port liners , and change septa as needed 清洗进样口，如有必要，更换密封垫，衬管，隔垫。
	3.	Adding an optional heating attachment enables you to maintain preheated samples at temperatures up to 80 c . this allows you to fill samples which are highly viscous at ambient temperature 选配一台进样口加热装置，则可保持预热样品的温度在80 c ，这使得高粘度样品在室温条件下就能顺利进样。
	4.	Under this condition , the linear range , the limits of detection , the recoveries , the relative standard deviations of the method to every component have been carried on 进样口温度220 ，检测器温度250 。在此条件下，对各组分进行了方法的线性范围及检测限，方法的准确度，方法的精密度测定。
	5.	The electric field distribution at the cross is simulated and analyzing using the soft of ansys5 . 7 . then the electrophoretic method has been optimized . the electrophoresis and the volume of injection have been significantly controlled using this method 设计了微通道电泳芯片的电泳操作方法，并用有限元分析软件对在进样和分离条件下，进样口处的电场强度分布进行了模拟分析，在此基础上对电泳操作方法进行了优化，实现了进样量和电泳过程的有效控制； 6

Similar Words：

"进样阀, 取样阀" Chinese translation, "进样阀隔片" Chinese translation, "进样隔膜胶垫" Chinese translation, "进样环管" Chinese translation, "进样间隔" Chinese translation, "进样量" Chinese translation, "进样器" Chinese translation, "进样器；注射器" Chinese translation, "进样器隔片的注射寿命" Chinese translation, "进样器检修手册" Chinese translation