Chinese translation for "轴位移"

axial translation

Related Translations:

缓冲器位移:  buffer offset

位移抑制:  restraint of displacement

偏航位移:  off-track displacement

位移开关:  displacement switch

相位位移:  shift phase

位移计数器:  shift counter

固态位移:  solid displacementsoliddi lacement

初始位移:  initial di lacementinitial displacement

位移律:  displacement lawlaw of displacement

溶剂位移:  solvent shift

Example Sentences:

	1.	So , in the paper , proceeding from the automatic control of extrusion velocity and based on the basic control strategy presented firstly , the relation among parameters of the process such as pressure , temperature and displacement is investigated , and the model of the process has been built using system identification method . then , a corresponding controller is designed together with its control algorithm , and the control system is proved viable and effective by the results of simulation on the control system . in the end , the problem of the realization of the control system is discussed by using modularization method . the hardware of the control system is designed and a sofeware with a perfect manmachine interface is developed , too 因此，本文从挤压速度的控制出发，首先探讨并确立了本系统的基本控制策略；然后根据此控制策略的必然要求，对该工艺挤压过程所涉及到的挤压力、温度、挤压轴位移等参数间的关系进行了深入研究，利用系统辨识方法建立了挤压过程关键阶段的数学模型；在此基础上完成了相应的控制器设计，给出了控制算法，并对所设计的控制系统进行了仿真。
	2.	This paper simply introduces the device of on - line monitoring for the thrust of the rotating maching , then discu ed the finite dement analyses on the on - line monitoring elastic dement for measuring thrust in detail , in order to develop the performance of the se or and the device , we calculated the distribution of the stre 、 strain 、 axial di lacement in the elastic element using the finite element method when the axial forces f = 3 104n , the result is very satisfied 简单介绍大型旋转机组轴向力在线监控装置，然后详细介绍轴向力测力弹性元件的有限元分析，为了提高所研制的测力传感器的性能，采用有限元方法计算了弹性元件在轴向力f = 3 104n时的应变、应力、灵敏度及轴位移等的分布情况，分析结果表明：所设计的测力传感器完全符合厂方的要求及仪表性能指标。

Similar Words：

"轴位断面" Chinese translation, "轴位平扫" Chinese translation, "轴位取代" Chinese translation, "轴位入码器" Chinese translation, "轴位数字变换器" Chinese translation, "轴位移变送器" Chinese translation, "轴位指示器" Chinese translation, "轴位置" Chinese translation, "轴位置传感器" Chinese translation, "轴温" Chinese translation