Mobile
Log In Sign Up
Home > english-chinese > "转动手柄" in Chinese

Chinese translation for "转动手柄"

rotational controller

Related Translations:
旋转控制手柄:  rotation control handle
连续转动:  continuous rotation
地轴转动:  nutation
转动平衡:  equilibrium, rotationalrotary balancerotational balancerotational equilibrium
转动圆盘:  rotary disk
转动方向:  direction of rotationrotation direction direccion de rotacionse e of rotationsense of rotation
转动轴:  axis of revolutionaxis of rotationaxis rotationdrive shaftdriver shaftpivoted axlerotary axisrotation axisrotation, axis ofrotational axistrain axistransmission shaft
正常转动:  proper rotation
转动环节:  rocking link
转动套筒:  rotating sleeve
Example Sentences:
1.He rotates the handle gently
他轻轻地转动手柄
2.Users without electric power will be able to turn a wind - up handle to recharge the battery
用户在没有电的情况下可以转动手柄给电池充电。
3.Users without electric power will be able to turn a wind - up handle to recharge the battery
用户在没有电的情况下可以转动手柄手动给电池充电。
4.Users without electric power will be able to turn a wind - up handle to rechange the battery
用户在没有电的情况下将能够切换到转动手柄式的电池充电模式。
5.If you turn the handle , the control air is not supplied to the pipe named “ e ” , but to the pipe named “ p ”
如果你转动手柄,控制空气不会供给到管路e ,但会供给到管路p 。
6.If you turn the handle , the control air is not supplied to the pipe named “ p ” , but to the pipe named “ e ”
如果你转动手柄,控制空气不会供给到管路p ,但会供给到管路e 。
7.The redesigned scooter allows the rider to steer by leaning to the right or left , rather than by turning the handlebars
新款的滑板车让驾驶者可以通过向右或向左倾斜方向盘来改变方向,无需再转动手柄
8.When you want to manoeuvre the main engine by the pneumatic manoeuvring system , it is necessary to turn the handle to the “ normal ” position
当你想要通过气动操纵系统操纵主机时,必须转动手柄到正常位置。
9.When you want to manoeuvre the main engine by the mechanical manoeuvring system , it is necessary to turn the handle to the “ emergency ” position
当你想要使用机械操纵系统操纵主机时,必须转动手柄到应急位置。
10.How to adjust the gap between the upper and lower blades . loss the screw first , then turn the handle to what you need , then fasten the screw again
间隙调整时需将锁紧螺钉松开,然后转动手柄至所需的刻度值,再将锁紧螺钉锁紧。
Similar Words:
"转动势" Chinese translation, "转动势垒" Chinese translation, "转动是否顺畅" Chinese translation, "转动视野" Chinese translation, "转动视野,注视视野" Chinese translation, "转动手使掌心向上" Chinese translation, "转动手腕子" Chinese translation, "转动受感器式空速表" Chinese translation, "转动数率,变化率" Chinese translation, "转动刷" Chinese translation