Chinese translation for "轧制压力"

draught pressure
pressure of rolling
roll pressure
rolling pre ure
rolling pressure

Related Translations:

轧制:  [冶金学] roll down;roll;rolling◇轧制薄板 rolled sheet metal; 轧制材 rolled stock; 轧制成形 [冶金学] roll forming; 轧制钢 rolled iron; rolled steel; 轧制钢板 rolled plate; rolled sheet material; 轧制钢材 rolled steel;

轧制裂缝:  rolling crack

轧制工艺:  rolling mill practicerolling technology

带钢轧制:  strip milling

轧制梁:  rolled beam

型钢轧制:  rolling of sectional ironrolling of sectionssection rolling

轧制管材:  drawn and rolled tuberolled tube

线材轧制:  rod rollingwire millingwire rod millingwire-rod milling

轧制时间:  pass timerolling time

轧制钢板:  folled sheet matcrialroll platerolled platerolled sheet materialrolled sheet steel

Example Sentences:

	1.	Conventional roll casting of a roll caster is simulated based on the established models 在所建立的轧制压力模型的基础上，对常规铸轧进行了仿真计算，计算结果与实测数据相吻合。
	2.	It also simulated the influence and relationship in the transfiguration resisting force , coefficient of he transfiguration resisting force , rolling area , rolling temperature , rolling pressure , loop length , the transition between loop length and loop high 模拟仿真出了变形抗力、接触面积、温度、轧制压力、活套套量、活套套量与套高转换等各个模型之间的相互影响。
	3.	According to the special characters of a multi - roll cold tandem mill , a rolling force prediction model based on fuzzy algorithm and cerebellum model articulation controller ( cmac ) combined with the traditional model was designed to improve the precision of rolling force prediction 摘要针对宽带钢多辊冷连轧机组特点，为提高轧制力的预报精度，在结合传统轧制压力模型的基础上把模糊算法和神经网络有机结合，设计出基于模糊小脑模型神经网络的多辊冷连轧机轧制力预报模型。
	4.	Fictious simulation of high - speed roll casting has been carried out on the basis of the fact . the results showed that roll casting speed increase with the decrease of the thickness of the strip , and the peak value of rolling pressure decrease with the increase of roll casting speed and thickness of strip or the increase of roll casting zone . the designed parameters of mechanical capabilities of the roll caster should be raised when rolling pressure increase with roller diameter increase 研究结果表明，减薄铸轧板坯厚度可提高铸轧速度；随着铸轧速度降低、铸轧区增大与铸轧坯厚度减薄，轧制压力峰值增大；随着铸轧辊径增大，轧制压力增大，因此铸轧机力能设计参数也要相应增大。

Similar Words：

"轧制型材" Chinese translation, "轧制型材缘条" Chinese translation, "轧制型钢" Chinese translation, "轧制型钢梁" Chinese translation, "轧制形变热处理" Chinese translation, "轧制压缩比" Chinese translation, "轧制压缩率" Chinese translation, "轧制氧化皮" Chinese translation, "轧制硬化" Chinese translation, "轧制用钢锭" Chinese translation