| 1. | Variation of surface roughness of a sheet during superplastic deformation
板料超塑性变形时表面粗糙度演化 |
| 2. | Fatigue property and superplastic deformation of bulk amorphous alloys
块体非晶态合金的疲劳性能与超塑性变形 |
| 3. | Superplastic co - deformation strengthening terms of flame spraying coating
表面喷熔层超塑性变形强化及其协调变形条件 |
| 4. | Cavity behavior of sic mb2 magnesium matrix composites during high strain rate superplasticity deformation
2复合材料高应变速率超塑性变形的空洞行为 |
| 5. | Microstructural evolution during superplastic deformation in large - grained single phase ni - 48al intermetallics
金属间化合物超塑性变形过程中的组织演化 |
| 6. | Exploration enhancing strain stress of superplastic deformation using pendant hammer type tensile tester
采用吊垂式拉伸试验机探讨超塑性变形速度的提高方式 |
| 7. | The superplastic behavior of tc6 titanium on the condition of different temperature and different strain rate was explored
本文对不同初始应变速率和变形温度条件下tc6钛合金的超塑性变形行为进行了系统研究。 |
| 8. | The effects of temperature and strain rate were analyzed too . furthermore , the tensile fracture surface of tc6 titanium was analyzed by sem
分析了tc6钛合金在变形过程中不同变形温度、初始应变速率对流变应力的影响规律，并且对变形温度、初始应变速率在tc6钛合金超塑性变形中的显著性进行了探讨。 |
