Chinese translation for "负载等"
|
- load dispatch
Related Translations:
稳压负载: voltage regulation load 计算负载: assumed loadcalculated load 轴负载: axle loadaxle weight 变负载: changing loadvarying duty 电容负载: antiinductive loadcapacitance loadingcapacitive loadcondensive loadload, capacitive 总负载: aggregate loadoverall loadtotal loadingtotal offered load
- Example Sentences:
| 1. | Load dispatching board
负载等盘 | | 2. | The system satisfied all requirements , such as response speed , system loading and so on
本系统的各项指标(如系统响应速度、系统负载等)均达到了指定的要求。 | | 3. | The product has good over load - proof and con corona - proof features , it is widely used in windings of electric machines and appliances
该产品具有抗电晕、过负载等特点，广泛用于电机电器的绕组。 | | 4. | The product has good over load - proof and con corona - proof festurs . it is widely used in windings of electric machine and appliances
该产品具有抗电晕、过负载等特点，广泛用于电机、电器等绕组。 | | 5. | It can not only tolerate intrusions and banlance loads , but also can scale flexibly and work robustly , and do not exist single - failure components
它不仅具有入侵容错、均衡负载等功能，同时具有灵活的扩充能力和很好的强健性，消除了可能“单点失效”的组件。 | | 6. | Assume a furnace will require approximately 24 , 000 watts after all heat losses and load factors have been considered . increasing this 24 , 000 by 25 % to 50 % gives a wattage requirement of between 30 , 000 and 36 , 000 watts
假定在考虑了热量散失和负载等因素之后一个熔炉大约需要24000瓦的能量。将这个功率值增加25 %到50 %之后所需的功率在30000瓦到36000瓦之间。 | | 7. | Assume a furnace will require approximately 20 , 000 watts after all heat losses and load factors have been considered . increasing this 20 , 000 by 25 % to 50 % gives a wattage requirement of between 25 , 000 and 30 , 000 watts
假定在考虑了热量散失和负载等因素之后一个熔炉大约需要20 , 000瓦的能量。将这个功率值增加25 %到50 %之后所需的功率在24 , 000瓦到30 , 000瓦之间。 | | 8. | Numerical results are given to demonstrate the effects of several factors including the number of basis functions , the thickness of waveguide , the terminations of waveguide and different frequency on the radar cross section ( rcs ) of a slot array
物理光学法用于有限电尺寸导体平板散射的分析。文中给出了缝隙阵列在不同频率、基函数个数、波导厚度、终端负载等情况下的计算结果。 | | 9. | By comparison , implicit euler is better method as a kernel of transmission line simulation computing and programming to transmission line transient with different conditions of boundary and two line coupling or even more complicated internal switching or loading
本文对传输线在不同边界条件、传输线耦合、线路内部突然开路、短路、接内部接各种负载等情况下的暂态过程进行编程计算的到仿真波形。 | | 10. | So they can not be used in on - line fault detection and condition monitoring . and the explanation of the time - frequency analysis is not easily accepted by the engineers . the experimental factors , such as rotational speed and measured position and fault distribution a
文中还针对转速、测点位置、故障分布(位置) 、负载等因素对频谱分析、包络分析、时延相关解调等方法的诊断效果进行了大量的实验研究。 |
- Similar Words：
- "负载导纳" Chinese translation, "负载的缆车" Chinese translation, "负载的模拟研究" Chinese translation, "负载的潜在能力" Chinese translation, "负载的约束" Chinese translation, "负载等盘" Chinese translation, "负载等效" Chinese translation, "负载等员" Chinese translation, "负载第" Chinese translation, "负载点" Chinese translation
|
|
|
