Chinese translation for "补强板"

reinforcement pad
reinforcement plate
reinforcing plate
stiffener
stiffening plate

Related Translations:

补:  Ⅰ动词1.(修理; 修补) repair; mend; patch 短语和例子补鞋 repair [mend] shoes; 补车胎 mend a puncture; 修桥补路 build bridges and repair roads; 补漏 stop up holes; 补一补 have it repaired; 补袜子 darn socks; 补衣服 patch c

Example Sentences:

	1.	The results show that welding the appropriate reinforcement plate to the girder crack can eliminate crack expanding and assure crane safe operation 结果表明，采用参数适当的补强板，可降低起重机主梁裂纹尖端的应力，从而保证起重机的安全。
	2.	Using the ansys finite element analysis software , this paper analyzes reinforcement plate of different length welded to crane girder crack and find out the girder ' s stress and deformation 摘要采用ansys有限元分析软件，对因出现裂纹的起重机主梁而添加的补强板进行系列计算，得出修补后主梁裂纹的应力及应力强度因子的变化规律。
	3.	The conclusion of reappearing analysis is that crane bridge be used as usual because main weld maximum stress of upper cover plate of main beam lower than yield limit though it higher than permissible stress . inner stress of secondary beam was over ultimate strength , and deforming is ultra big . so it was unfit for produce and secondary beam must be changed 再现分析得出的主要结论为：桥架的主梁上盖板主焊缝的最大应力超过了许用应力，但小于屈服极限，可以继续投入使用；副梁内部的应力远远超过了强度极限，变形特别严重，不能满足生产要求，因此更换新的副梁；端梁内部的应力超过了屈服极限，小于强度极限，在应力较大的位置焊接补强板；投入使用后，要对整个桥架进行定期检查。
	4.	Panel zones usually are very ductile elements capable of undergoing severe inelastic strain reversal without a decrease in strength . maximum strength and stiffness of frames is attained when all joints are design for the maximum shear force that can be developed based on the strength capacity of the members framing into joint 可以说整个框架的强度、刚度很大程度上依靠节点域的抗剪性能，通过加设补强板的方法，可以改善框架在侧向力作用下的承载力，刚度和抗震性能。

Similar Words：

"补气止血" Chinese translation, "补气止血,补气摄血,补益摄血,补脾摄血" Chinese translation, "补遣" Chinese translation, "补强" Chinese translation, "补强，尺寸" Chinese translation, "补强板试验" Chinese translation, "补强材料" Chinese translation, "补强材料的型式" Chinese translation, "补强层" Chinese translation, "补强衬里" Chinese translation