| 1. | Extrahaustorial membrane wrinkled , stained more deeply , wrinkled , and perforated
吸器外质膜皱褶，电子致密度加深，并出现孔洞。 |
| 2. | The sintered temperature was one of key parameters to the relative density and grain size
烧结温度是决定烧结体致密度高低的主要因素。 |
| 3. | Timber structures - testing of joints made with mechanical fasteners - requirements for wood density
木结构.用机械紧固件连接的接头试验.木材致密度要求 |
| 4. | The sample prepared by sol - gel way shows higher density than samples achieved by other ways
实验表明，采用sol - gel方法制备的ybco样品比其它方法制备的样品的致密度高。 |
| 5. | Focus shall cause a particular energy movement in the field that can be useful for releasing density as an ascending being
专注活动将导致场中特别的能量运动，可对提升者释放致密度有用。 |
| 6. | With respect to al _ ( 2 ) o _ ( 3 ) coatings production , the to and rms techniques perform much better than the ps one
采用ps法获得的al _ 2o _ 3镀层的表面粗糙、致密度低， to法和rms法获得的较好。 |
| 7. | Focus shall cause a particular energy movement in the field that can be useful for releasing density as an ascending being
专注活动将导致场中特别的能量运动，可以对提升中的人释放致密度有用。 |
| 8. | And then hot hydrostatic extrusion is used to press the sintered billets . the following aspects have been researched on
对粉体坯料进行低温真空反应烧结和高温真空反应烧结,以得到致密度较高的烧结坯。 |
| 9. | Therefore , the conclusion that narrowing particle size distribution of the start powders is helpful to enhancing density of material was reached
结果表明比较窄的原料尺寸范围有利于提高材料的致密度。 |
| 10. | The mixed solution was ultrasonically dispersed to improve the dispersion degree . after that , the sample was pressed into shape and annealed
实验发现在100mpa下成型的样品的致密度比无压热处理的要高出近10个百分点。 |
