| 1. | Part 3 : the application of high - finesse cavity
第三部分：介绍高精细度腔的应用。 |
| 2. | Method of determining and expressing fineness of feed materials by sieving
筛过的饲料的精细度测定和表示方法 |
| 3. | Precious metals - the finenesses of solders used with precious metal jewellery alloys
贵金属.与贵金属珠宝合金一起使用的钎料的精细度 |
| 4. | On the above basis , the high - finesse cavity can make an application in cavity - qed experiment
从而在此基础上使高精细度腔在qed实验中得到应用。 |
| 5. | The cavity length is measured to be about 48 m and the cavity losses are determined by the cavity ring - down ( crd ) technique
7 )建立了一套超高精细度光学微腔，腔长约48林m 。 |
| 6. | Sony researchers believe that refinements to this technique will enable them to move beyond seven - layer discs to densities of up to 20 layers
索尼研究人员认为这种技术的精细度让他们可以超过7层记录层的密度达到20层。 |
| 7. | The finesse of the micro cavity is measured to be 203 , 000 . the corresponding critical photon number mo and critical atom - number no is 0 . 007and 0 . 03 respectively
采用腔衰荡技术测量了腔的精细度，测得腔精细度约203 ， 000 。 |
| 8. | We usually think of a piece of glass as a continuous medium , but on a length scale a millionth the thickness of a human hair it ' s not
我们通常会认为玻璃是一种连续的介质，但如果从比一根头发的精细度还要小一百万倍的尺度上看就不是这样了。 |
| 9. | The high - finesse cavity can be used to measure the laser linewidth due to its narrower cavity linewidth , with which the linewidth of dbr laser is measured as 1 . 49mhz
由于高精细度腔窄线宽特点，它可用来测量激光线宽。实验中用它测量dbr激光器线宽为1 . 49mhz 。 |
| 10. | First , this thesis gives a complete review of the development of traffic simulation , compares different models in level of detail ( lod ) and application at which is aimed
本文首先综述了交通仿真的发展历程，比较了不同精细度( lod )和面向不同应用的交通仿真模型。 |
