| 1. | The face of the column forms a very accurate slide .
立柱的正面是非常精密的导轨。 |
| 2. | Transverse bracing was installed between the two shafts .
两根立柱之间设置了横撑。 |
| 3. | The second temporary pier was such that its legs straddled the width of the pier .
第二临时墩的立柱间距超过桥墩的宽度。 |
| 4. | The second crack is a crack originating at the groove weld toe of the column flange-girder flange connection .
第二种是产生于立柱翼缘与主梁翼缘连接处的坡口焊缝焊趾处的裂纹。 |
| 5. | These cracks occurred at either the beam flange or in the column flange depending on the reentrant corner weld angle .
这些裂纹视凹形焊角的不同，或者出现在横梁翼缘上，或者出现在立柱翼缘上。 |
| 6. | The plain milling machine consists of a boxlike column, which houses the motor and the gears or belt mechanism for driving the spindle and table .
普通铣床有一个箱式立柱（床身），立柱装有电动机和齿轮或皮带轮装置，以驱动主轴和工作台。 |
| 7. | Centre post press tool sets with spring stripper
弹簧冲空模板的中间立柱式冲压机 |
| 8. | Crack analysis of machine column after an unexpected fire
过火后机床立柱裂纹分析 |
| 9. | Cycles . stem and handlebar bend . assembly dimensions
自行车.立柱和车把.安装尺寸 |
| 10. | The cross - piece is mortised into the upright post
横梁和立柱是用榫眼接合一起的 |
