Chinese translation for "短路过渡"
|
- dip-transfer
short circuiting transfer
short-circuiting transfer
Related Translations:
短路传送: short-circuiting transfer 短路故障: short circuit faultshort trouble 热短路: thermal short circuit 虚短路: imaginary shortvirtual short circuit 短路绕组: short circuit windingshort circuited windingshort-circuit windingshort-circuited winding 使短路: short outshortcircuitshort－circuit
- Example Sentences:
| 1. | Research on waveform control method of short transition high - speed welding
短路过渡高速焊波控法的研究 | | 2. | Randomicity amp; stability of short - circuiting droplet transfer in arc welding process
弧焊短路过渡过程的随机性与稳定性 | | 3. | The process of short circuit transition is non - linear and with many influencing factors , and it is difficult to find an ideal model for control
短路过渡的co _ 2气体保护焊过程具有非线性和不确定性，干扰因素众多，很难得到一个理想的数学模型进行控制。 | | 4. | The co2 welding process needs the special external characteristic and dynamic characteristic of power source for there are alternately arcing time and short circuiting time at the period of short - circuiting co2 welding
在采用短路过渡方式的co2焊过程中,短路和燃弧过程交替发生,因此它对电源的外特性和动特性有特殊的要求。 | | 5. | Based on the relative theories about electric circuit and synchronous generators " post - fault transient , a practical computerized method making use of node impedance matrix is proposed to calculate the instantaneous currents of a faulty power system
本文基于电路理论和发电机的短路过渡过程理论，利用节点阻抗阵推导出电力系统短路时任意时刻短路电流的实用计算机算法。 | | 6. | Transitional feature of the arc and metal droplet in the welding process with steam shielded arc is investigated by means of analysing the waveforms of welding voltage and current under different welding regimes and it is found that there are two types of arc process behavor ? " arc starting - arc blowing out - short - circuiting " and " arc - starting - short - circuiting " . under the condition of constant diameter of welding wire and its feeding speed , the arc process behavor can be changed by adjusting the inductance of welding circuit as well as the voltage of power supply . if arc process behaves as alternative process of " arc starting - arc blowing out - short - circuiting " with minimum time duration of arc blowing out and maximum frequency of short - circuit transition , the welding process will be stable with less spatter and smooth weld bead
通过分析不同焊接规范下的焊接电压和电流的波形.研究了水蒸气保护下电弧及熔滴过渡的特点，发现其电弧过程行为有“燃弧?熄弧?短路”和“燃弧?短路”两种形式.在焊丝直径和送丝速度一定的情况下，通过调节焊接回路中的电感量和电源电压，可以改变电弧的过程行为形式.若电弧过程呈“燃弧?熄弧?短路”交替进行，并且熄弧时间最短时，短路过渡频率最高，在这种情况下，飞溅小，焊道成型好，焊接过程稳定 | | 7. | In this thesis , an arc sensor based on fuzzy control is designed . through the change of welding current in waving , the arc sensor judges the excursion and provides the adjusting output , meanwhile , it transmits the data acquired to a personal computer to be displayed and analyzed
本文介绍了短路过渡的co _ 2气体保护焊电弧传感器，通过对摆动过程中焊接电流的变化来判别焊缝偏移情况，采用模糊控制得到控制输出，并将数据经串口通信传送到pc机上加以显示和分析。 |
- Similar Words：
- "短路功率" Chinese translation, "短路功率因数" Chinese translation, "短路故障" Chinese translation, "短路故障电平" Chinese translation, "短路光纤" Chinese translation, "短路过渡电弧焊" Chinese translation, "短路过渡方法" Chinese translation, "短路过渡过程" Chinese translation, "短路过渡焊接" Chinese translation, "短路过渡焊接技术" Chinese translation
|
|
|
