| 1. | Simple process procedure , easy solidified from melt material
简化工艺流程，物料由熔融状态到最终固化，一步完成。 |
| 2. | Plastics - determination of drawing characteristics of thermoplastics in the molten state
塑料.热塑性塑料熔融状态下的拉伸特性测定 |
| 3. | Plastics - determination of drawing characteristics of thermoplastics in the molten state
塑料.热塑性塑料熔融状态下的拉伸特性测定 |
| 4. | Plastics . determination of the rheological characteristics in the molten state . capillaru rheometer method
塑料制品.熔融状态下流变特性的测定.毛细管流变仪法 |
| 5. | - test method for color of maleic anhydride and phthalic anhydride in the molten state and after heating platinum - cobalt scale
熔融状态下和加热后顺酐和苯酐颜色的试验方法 |
| 6. | Standard test method for color of solid aromatic hydrocarbons and related materials in the molten state platinum - cobalt scale
熔融状态中固体芳烃与相关材料的颜色的标准试验方法 |
| 7. | The orientation of the reinforcing fibres changes during the deformation process , and when the matrix solidifies the final orientation pattern is retained in the part
在模塑料从熔融状态到固体状态的过程中，纤维基体混合物在模具中发生流动变形，变形改变了纤维的取向。 |
| 8. | These rocks were created early in lunar history , when the outer portion of the moon was completely molten ; the low - density anorthosite floated to the surface of the magma ocean
这些岩石在月球历史的早期形成，当时月球外部完全呈熔融状态，低密度的斜长岩会浮到岩浆海的表面。 |
| 9. | As a result of plastic be in melt condition all the time inside mould of hot flow path , goods does not need clip runner , basically be not to have waste treatment , accordingly but managing and much raw material
由于塑料在热流道模具内一直处于熔融状态，制品不需修剪浇口，基本上是无废料加工，因此可节约大量原材料。 |
| 10. | This machine laminates plastic film or kraft - paper on the surface of pp or pe woven fabric with the adhesive material at melting status , or laminates color - printed opp , cpp film to produce compounded bags
本机组适用于以聚丙烯聚乙烯编织布为基材,利用涂膜料在熔融状态下的胶粘性而进行涂塑复合纸塑复合，或同彩印好的 |
