Chinese translation for "热力膨胀阀"
|
- thermostaticexpa ion valve
thermostaticexpansion valve
Related Translations:
热力钻孔: thermic boringthermodrill 热力系统: flow sequencethermodynamic system 热力效率: efficiency，thermodynamicthermodynamic efficiency 热力边界层: thermal boundary layer 热力沉降: thermal precipitation
- Example Sentences:
| 1. | Analysis on the matching performance of thermal expansion valve with plate evaporator
板式蒸发器与热力膨胀阀的匹配分析 | | 2. | Comparison of the effect of distribution performance comparison by thermostatic expansion valve and electronic expansion valve
热力膨胀阀与电子膨胀阀对分液性能影响的比较 | | 3. | The results show that , when the compressor continuously runs , the stability of the test bed after using manual valve is better than that of using thermal valve , and it is little affected by the kinds of valves for adjusting cooling water ; and that , when the compressor intermittently runs , the operation stability would be obtained if pneumatic valve is used to adjust cooling water , especially at low speed
结果表明，压缩机连续运行时，制冷剂采用手动阀调节后工况的稳定性明显好于采用热力膨胀阀时的情况，此时调节冷却水量用的电动调节阀和气动调节阀对工况稳定性影响相差无几；间歇运行时，无论是热力膨胀阀还是手动阀，即便压缩机通电时间最长，仍达不到设定工况，特别是低速的断续尤为明显，而使用气动阀就能很好地解决这一问题。 | | 4. | In order to study the operation characteristics of hpacdhws , distributed parameter simulation models of the fin heat exchanger and the plate heat exchanger are built up . the compressor model is founded in map - based method , and the thermodynamics expansion value model is built up in force balance method . the dynamic system model is the efficient connection of all component models by laws of equalization of mass , momentum and energy
为了研究hpacdhws的运行特性,本文利用分布参数法分别建立了翅片管换热器和板式换热器的动态数学模型,采用图形法和力平衡法分别建立了压缩机和热力膨胀阀的集总参数计算数学模型,并基于质量、动量和能量守恒定律等约束条件,建立了hpacdhws的动态仿真模型。 | | 5. | Based on the theory of thermodynamic of refrigeration system , i . e . , the viewpoint of dynamic , distributed parameters and parameters quantitatively coupled , and with the application of microelement method , this thesis is contains a theoretical and experimental research on the structural characteristics and performance of small - scale cold storage . main contents of this thesis are as what follows : first , the key component sub - models for a small - scale cold storage are developed
本文运用“制冷系统热动力学”理论，以“动态” 、 “分布参数”和“参数间定量耦合”的观点，用“微元”的方法，对型号d045 ? 35 110gfd蒸发器、型号lcu - 32fj冷凝机组和型号tex2 - 2 . 3热力膨胀阀等主要部件组成的小型冷库的结构特点和运行性能进行了理论和实验研究。 | | 6. | Automotive air conditioner accessories : automotive air conditioner cooler , evaporator , heat sink , air conditioner , temperature adjuster , heater , central cooler , air desiccators , cooling fan controller , internal heat exchanger , compressor , motor , air warmer , warm air device , electronic fan for cooling condenser , liquid can , thermal expansion valve , air condition pipeline , switch , clutch , connector , height valve , shunt valve and all kinds of automotive air conditioner production materials ( body aluminum , copper materials , etc ) , production equipment , measurement equipment , etc
车用空调配件：各种车用空调冷凝器、蒸发器、散热器、空调器、调温器、加热器、中冷器、空气干燥器、冷却风扇控制器、内部热交换器、压缩机、电动机、暖风机、暖风装置、各种冷凝器电子扇、贮液灌、热力膨胀阀；各种车用空调管路、开关、离合器、接头、高低阀、换向阀及各种车用空调生产材料（车用铝材、铜材等） 、生产设备、检测设备等。 | | 7. | It specifies the process of the design , simulation and experiment of liquid cooling system . main contents of the thesis are as follows : description of the present usage of liquid cooling system , presentation of a new type of liquid cooling system and description of its work principles ; design of the liquid cooling system , which mainly deals with the design and collating calculating of serpentine condenser and heat exchangers adopted in this system . meanwhile , the model chosen calculating of compressor 、 thermal expansion valve 、 plate evaporator 、 water pump and the like equipment used in the system are also carried out
本文的主要内容如下:对液冷源使用现状进行了描述,提出了一种新型液冷源系统并对其工作原理进行了阐述;对系统进行了设计,主要对系统中所采用的管带式冷凝器和水侧空/液换热器进行了设计和校核计算,同时对系统中所用到的压缩机、热力膨胀阀、板式蒸发器、水泵等配套设备进行了选型计算;分别对制冷系统和冷却液循环系统进行了数学建模。 | | 8. | They will short down the working life of air compressor because they are always started or stopped when we want to make the railway carriage stay in a fixed temperature . now , automatic and intelligent control systems are being applying in bus air - conditions control . in this way , computers control the work of air compressor , the turnaround speed of fan , the open degrees of wind controlled doors and so on
我国大多数客车空调仍然采用简单的压缩机开关控制及循环离合控制系统，如：离合器?热力膨胀阀系统( cctxv )和离合器?节流管系统( ccot ) ，这些控制方式的精度低，当进行恒温控制时压缩机处于频繁的开、停状态，缩短了压缩机的工作寿命。 | | 9. | Concentrative parameter model and non - homogeneous model of dynamic distribution parameter are respectively adopted in the compressor and the heat exchangers . a dynamic concentrative parameter model is adopted in the thermostatic expansion valve on the basis of the analysis of the characteristics of enclosure structure , the dynamic mathematics model is established through the simplification of boundary condition
压缩机采用集中参数模型；换热器采用动态分布参数的分相模型；热力膨胀阀采用集中参数动态模型；通过对冷库维护结构的特点分析，采用边界条件简化处理的方法，建立相应的动态参数数学模型。 |
- Similar Words：
- "热力喷射钻井；喷射穿孔" Chinese translation, "热力喷射钻井用燃烧器" Chinese translation, "热力喷射钻具" Chinese translation, "热力喷射钻孔燃烧器" Chinese translation, "热力喷雾式除尘器" Chinese translation, "热力平衡" Chinese translation, "热力平衡表" Chinese translation, "热力坡度" Chinese translation, "热力破坏曲线" Chinese translation, "热力破碎" Chinese translation
|
|
|
