| 1. | A hardpoint marker should be placed at the center of the hardpoint
挂载点标记应位于挂载点中心。 |
| 2. | Your goal is to play the lower left - hand corner of maps flashing flashing dots , the more dots close to the center , the higher the score
你的目标是游戏左下角地图中一闪一闪的圆点，越接近圆点中心，得分越高。 |
| 3. | Infinity is used as a base point in homemorphic transformation to study infinity for a class of fifth system and isochronous center problems
摘要通过同胚变换把系统无穷远点化为原点，研究了一类五次系统无穷远点中心与拟等时中心问题。 |
| 4. | Research on interface shows the joint begins at the bond periphery , then the center area of the joint , and at last the achievement of connection of the whole joint
键合试验发现:键合点的形成始于键合点周边,然后是键合点中心区域,最后完成整个界面的连接。 |
| 5. | Test results show that axial force of permanent magnet bearings is not influenced by progressive displacement or displacement decline ; axial force is symmetry of origin
此外，试验结果表明了永磁轴承的轴向力不受位移递增或递减试验的影响，而且轴向力是沿原点中心位置对称的。 |
| 6. | 0 ? 75in connectors for frequencies below 3 mhz for use with printed boards - two - part connectors for printed boards having contacts spaced at 1 , 91 mm 0 , 075 in centres and staggered terminations at that same spacing
印制板用频率低于3mhz的连接器.触点中心间距和交错端子间距均为1 ? 91mm |
| 7. | 0 . 100in connectors for frequencies below 3 mhz for use with printed boards - two - part connectors for printed boards having contacts spaced at 2 , 54 mm 0 , 100 in centres and staggered terminations at that same spacing
印制板用频率低于3mhz的连接器.触点中心距和交错线端子间距均为2 . 54mm |
| 8. | 0 . 10in connectors for frequencies below 3 mhz for use with printed boards . part 3 : two - part connectors for printed boards having contacts spaced 2 . 54 mm o . 100 in centres and staggered terminations at that same spacing
印制板用频率低于3mhz的连接器.第3部分:触点中心相隔距离和交错线端子相隔距离为2 . 54mm |
| 9. | 0 75in connectors for frequencies below 3 mhz for use with printed boards . part 4 : two - part connectors for printed boards having contacts spaced at 1 . 91 mm 0 . 075 in centres and staggered terminations at that same spacing
印制板用频率低于3mhz的连接器.第4部分:触点中心相隔距离和交错线端子相隔距离均为1 91mm |
