| 1. | Rubber - determination of carbon black content - pyrolytic method
橡胶炭黑含量的测定热解法 |
| 2. | Chemical tests for raw and vulcanized rubber - methods for determination of carbon black content
生橡胶和硫化橡胶的化学试验.炭黑含量的测定方法 |
| 3. | The effect of carbon black on the resitivity of pu / cb composites was studied in this paper
本文还研究了炭黑含量对聚氨酯炭黑复合体系导电性的影响。 |
| 4. | Methods of testing plastics - chemical properties - determination of carbon black content of polyolefin compound
塑料测试方法.第4部分:化学特性.聚烯烃化合物中炭黑含量测定 |
| 5. | Standard test method for determination of carbon black content in polyethylene compounds by the muffle - furnace technique
用套炉技术测定聚乙烯化合物中炭黑含量的标准试验方法 |
| 6. | Polyolefin pipes and fittings - determination of carbon black content by calcination and pyrolysis - test method and basic specification
聚烯烃管和管接头.用焙烧和热解测定炭黑含量.试验方法和基本规范 |
| 7. | The results showed that the viscosity and temperature of glass transition of carbon black / polyurethane were improved with the content of carbon black increase in the blend system
随着炭黑含量增加，炭黑聚氨酯共混体系的黏度增大，玻璃化转变温度提高。 |
| 8. | But as the cb content increases , the disperse phase ( pet phase ) changes from nemaline to particles , at the same time mechanical properties of blends decrease
? cm 。在低炭黑含量( 10phr )下，分散相pet形成了纤维，但随炭黑含量增加，分散相pet山纤维状向颗粒状转变，复合材料的力学性能有所下降。 |
| 9. | Improvement of conductivity is more distinct , for example , titanate coupling agent and stearic acid decrease its composite ' s room temperature resistivity 10l - - 102 times , as cb content is 15 % ( w / w )
在导电性能上表现更为明显，如钛酸酯偶联剂和的硬脂酸在炭黑含量为15时，可使材料的电阻率降低1 2个数量级。 |
| 10. | When the content of carbon black in the system was between 13 % to 16 % , the distribution of carbon black in system was uniformity , the electrical conductive and the mechanical properties were satisfied for applications
炭黑含量在13 % ~ 16 %时，炭黑在体系中的分布较为均匀，纤维的导电性能较好，力学性能可以满足应用要求。 |
