| 1. | Design code for hydraulic concrete structures
水工混凝土结构设计规范 |
| 2. | Specifcations for design of concrete structures
混凝土结构设计规范 |
| 3. | Code for design of concrete structures
混凝土结构设计规范 |
| 4. | Code for design on reinforced and prestressed concrete structure of railway bridge and culvert
铁路桥涵钢筋混凝土和预应力混凝土结构设计规范 |
| 5. | In the new code for design of concrete structures ( gb50010 - 2002 ) , it ' s also pointed out definitely
而且新颁布的《混凝土结构设计规范》 gb50010 - 2002中，也明确提出将hrb400级钢筋作为钢筋混凝土结构的主导钢筋。 |
| 6. | The calculation results using the formula in code for design of concrete structures ( gb50010 - 2002 ) can fulfill requires of design
按照现行规范《混凝土结构设计规范》 ( gb50010 - 2002 )验算，承载力均可满足要求。 |
| 7. | The main achievements and proposals in this paper are accepted by new chinese reinforced concrete structure design code ( gb500 i o - xx )
本文主要成果己被我国《混凝土结构设计规范》 （报批稿、 gb50010 xx ）吸收。 |
| 8. | Abstract : simplifying the formula in code for concrete structure design ( gbj10 - 89 ) , we obtaine the appoximate formula of crack width , that is used to the beam of rectangular section in design
文摘:对《混凝土结构设计规范》 ( gbj10 - 89 )中的裂缝宽度计算公式进行化简，得出矩形截面梁裂缝宽度实用计算公式，供工程设计时使用。 |
| 9. | The standard of steel bar ' s intensity has been marked in " code for design of concrete structures " of china , but the standard of steel bar ' s ductility has not . the problem should be solved
我国《混凝土结构设计规范》已对钢筋强度提出了统一的标准，但对于钢筋延性尚未作出明确规定，可见对钢筋延性提出统一的评定标准是亟待解决的问题。 |
| 10. | 9 . some detail requirements , such as the maximum axial load ratio in columns , the minimum of confined transverse reinforcement within yield hinge regions and so on , are also proposed to modify chinese code ( gbj1o - 89 )
本文还讨论了现行《混凝土结构设计规范》 （ gbj10 ? 89 ）关于轴压比限值及柱端加密区约束箍筋最小要求等构造方面存在的问题，提出了相应的修正建议。 |
