| 1. | Liquid phase sintering of boron carbide
碳化硼陶瓷的液相烧结试验研究 |
| 2. | Liquid - phase sintering silicon carbide ceramic
液相烧结碳化硅陶瓷 |
| 3. | Composite process study of steel - bonded cemented carbide powder carbon steel
碳钢液相烧结复合过程研究 |
| 4. | Liquid phase sintering nano - zirconia toughened dental all - ceramics at low temperature
低温液相烧结纳米氧化锆增韧口腔全瓷材料的研究 |
| 5. | The microstructure of sintered body was observed by scanning electron microscope ( sem )
液相烧结时，颗粒合并是w颗粒长大的主要机制。 |
| 6. | The study showed that the densified process should be divide into two stages - solid phase sinter stage and liquid phase sinter stage
研究表明，液相烧结mo - cu合金的致密化过程分为固相烧结阶段和液相烧结阶段。 |
| 7. | W - cu composites are usually fabricated by infiltration - sintering porous tungsten compacts with molten copper or by liquid - phase sintering w - cu powder compacts
W - cu复合材料通常采用粉末冶金熔渗烧结或液相烧结法制取。 |
| 8. | The density of the mo - cu sinter was measured . the result of the measure showed that the liquid phase sintered mo - cu alloy gained 95 - 97 % relative density . the densified process was well carried out
本文测试了mo - cu烧结体的密度，测试结果表明，液相烧结mo - cu合金的相对密度在95 97之间，基本上实现了致密化。 |
| 9. | In this paper , the mechanical alloy technology ( ma ) was adopted . through the designing and optimizing of the ma technology and liquid phase sinter technology , the new electrician alloy - mo - cu was made
本文采用粉末冶金的非平衡制备高新技术?机械合金化法，通过机械合金化工艺、粉末生坯压制工艺和液相烧结工艺的设计与优化，制备出了mo - cu高比重合金。 |
| 10. | The process of the high energy ball milling , the process of the flan press and the process of the liquid phase sinter was studied . and the influence of those processes to the property of the mo - cu alloy was concluded
本文从工艺上主要研究了mo - cu复合粉末的高能球磨工艺、 mo - cu粉末生坯的压制工艺、液相烧结工艺以及不同的工艺条件对材料性能的影响。 |
