| 1. | Marginal tests voltage and registers
边际测试电压与缓存器 |
| 2. | Clients may specify their required test voltage between 100 v and 1 kv
客户可在100v至1kv内指定其所需的测试电压。 |
| 3. | Measurement uncertainties will vary with test voltages and resistances
测量不确定度将根据测试电压及电阻阻力而转变。 |
| 4. | Measurement of resistance of the same resistor at each additional test voltage
按每一额外测试电压，测量同一电阻器的阻力。 |
| 5. | Measurement of each voltage ratio at an additional test voltage and at one polarity
按一额外测试电压及电极，测量每一电压比。 |
| 6. | Calibration for the same range at a different output test voltage ( 5 test points )
校正同一量程的不同输出测试电压(五个测试点) 。 |
| 7. | Measurement status : parameter , voltage , frequency , circuit parallel series
测试状态:测试参数,测试电压,测试频率,测试回路串联并联 |
| 8. | Measurement of the first voltage ratio at one applied voltage and one specified polarity
按一测试电压及一指定电极，测量首个电压比。 |
| 9. | Calibration for each additional range at the same output test voltage ( 5 test points )
校正同一输出测试电压的每一额外量程(五个测试点) 。 |
| 10. | Multifunction of testing voltage value , current value , rf value and transient current strength
多用途测试电压值,电流值,射频值及瞬变电流强度等。 |
