| 1. | T temperature correction coefficient , dates from table 1
T温度校正系数，由表1查得 |
| 2. | C time correction coefficient , dates from table 2
C时间校正系数，由表2查得 |
| 3. | Calibration factor of a data channel
数据通道校正系数 |
| 4. | Design period adjustment
设计年限之校正系数 |
| 5. | Buoyancy correction factor
浮力校正系数 |
| 6. | Bottom correction factor
罐底校正系数 |
| 7. | Diagram 1 is the relationship between the environment temperature and the temperature correction coefficient t
图1为环境温度和温度校正系数t之间的关系。 |
| 8. | The realization of dmc and mdmc are given . some improvements on reference - curve - > error - truncation are presented
并对截断误差，反馈校正系数，控制量增量的设计进行改进。 |
| 9. | K . t k : the shaft liner wall thickness change correction coefficient caused by temperature rising , the value dates from diagram 4
K . t k :温升引起轴套壁厚变化校正系数，有图4查出 |
| 10. | Diagram 2 is the relationship between the running time and the time correction coefficient c under intermittent running status
表2是间歇式工作状态下运转时间和时间校正系数c之间的关系。 |
