| 1. | Non - destructive testing - penetrant testing - reference test blocks
无损检验.渗透检验.标准试样 |
| 2. | Non - destructive testing - penetrant testing - part 3 : reference test blocks iso 3452 - 3 : 1998 ; german version en iso 3452 - 3 : 1998
无损检验.渗透检验.第3部分:标准试样块 |
| 3. | Testing of compression moulding materials ; compression mould for the production of standard specimens of thermosetting compression moulding materials
模压材料的检验.制造热固模压塑料标准试样的压模 |
| 4. | Corrosion of metals and alloys - corrosivity of atmospheres - determination of corrosion rate of standard specimens for the evaluation of corrosivity
金属和合金的腐蚀大气腐蚀性用于评估腐蚀性的标准试样的腐蚀速率的测定 |
| 5. | The specimen shall be transverse , using dimensions less than standard if necessary , and shall be prepared from a wafer heat treated with the material to be delivered
试样应为横向试样，如有必要，试样尺寸小于标准试样，试样应采用在交货材料上切取并经过热处理的试料制备。 |
| 6. | The ratios of charpy impact value of small size specimen to that of the standard are studied by using the series charpy v - notch impact test method and the question how to select equivalent ratio of the charpy impact quota of non standard sample is also discussed
通过夏比v型缺口冲击试验，研究了结构钢小尺寸试样的冲击功与标准试样冲击功的比值在系列温度冲击试验中的变化规律，并述评了用等效比值数确定小尺寸试样冲击功指标的问题。 |
| 7. | Furthermore , a new method to measure the concentration of ferromagnetic alloys was exhibited , and its reliability was also confirmed , which is to measure the curie point of specimens by the dsc analysis and then compare the data with ones of standard specimens so that to observe the concentration of specimens
此外，论文中表述了一种新的铁磁材料组成成分测定的方法，并予以比较验证。即利用dsc分析测量铁磁转变居里点的变化，与标准试样进行比较，从而确定试样组成的含量。 |
