Chinese translation for "最大剪力"

maximum shear

Related Translations:

剪:  Ⅰ名词1.(剪刀) scissors; shears; clippers2.(姓氏) a surname 短语和例子剪成 jian chengⅡ动词1.(用剪刀等使细的或薄片的东西断开) cut (with scissors); clip; trim; snip; shear 短语和例子剪开 cut open; 剪羊毛 shear a sheep; 剪指甲 trim one

Example Sentences:

	1.	Depending upon stiffness and strength requirements , this transfer of bending moments can be achieved by either semi - rigid or rigid beam - column connections . in both case , the intersection between beams and columns ( the beam - column joint ) will be subjected to high shears 本文从节点域的屈服过程，破坏机理入手，采用虚功原理，对节点域屈曲进行了推演，得到了节点域破坏的最大剪力，以及屈服后所能承受的剪力。
	2.	C ompared the results of structural period , displacement and internal forces of mode 1 with mode 3 , we can know that the hypo - frame can increase the lateral stiffness of the mega steel - frame structures , decrease lateral - deformation of the structures , especially decrease the maximum inter - storey displacement obviously , and get the internal forces and deformation of the whole structure more uniform . from the analysis results , it can be found that the maximum axial force gets less with hypo - frame than without it , and the maximum shear force and bending moment get more with hypo - frame than without it . thus it can be seen that the mainframe can be an independent structure system by itself , but the cooperation of main and hypo frame should be considered for conducting the entire analysis and design , otherwise the mega structure can be unsafe , in addition , from the comparing analysis , it can be found that the shear force and bending moment of inside - row columns are increased much more than those of outside - row ones in a mega column 通过3个算例方案1和方案3结构周期、位移和内力反应的比较分析可知，次框架可以进一步增加巨型钢框架结构的抗侧刚度，减少结构侧向变形，特别是明显减少了结构最大层间位移，使整个结构的内力与变形分布更为均匀；次框架的加入使主框架柱最大轴力较无次框架情况减少，而主框架柱的最大剪力和弯矩较无次框架情况都有所增加，由此可知，虽然主框架本身可以成为独立的结构体系，但在分析设计时，还应该考虑主、次框架协同工作，进行整体分析、整体设计，否则结构会偏于不安全。

Similar Words：

"最大间距平面" Chinese translation, "最大间隙" Chinese translation, "最大肩宽" Chinese translation, "最大检测限度" Chinese translation, "最大简约法" Chinese translation, "最大剪力理论" Chinese translation, "最大剪切力" Chinese translation, "最大剪切面" Chinese translation, "最大剪切能理论" Chinese translation, "最大剪切应变锥" Chinese translation