Chinese translation for "支撑梁"

bearing beam
brace summer
support beam
supporting beam

Related Translations:

支撑叶片:  support blade

支撑剂:  pro antproppantpropping agent

支撑区:  grip zoneway of support

区域支撑:  zone support

木板支撑:  floor support

支撑元件:  supporting member

支撑钢筋:  bearing barbearingbar

支撑栽培:  supporting culture

上支撑:  tomount

举起支撑:  uhold=upholduphold

Example Sentences:

	1.	The ntsb says the wing of that seaplane that crashed off miami had cracks in the main support beam that probably went unseen for a long time 安全运输委员会说,在迈阿密坠毁的水上飞机的机翼在主要支撑梁处有断裂,这种情况已经很久都没有发生过了
	2.	The ntsb says the wing of that seaplane that crashed off miami had cracks in the main support beam that probably went unseen for a long time 安全运输委员会说,在迈阿密坠毁的水上飞机的机翼在主要支撑梁处有裂纹,这个裂纹可能已经很久了，但是一直没有检测到
	3.	The accelerometer which has simple fabricated process and high sensitivity and small parasitic capacitance and residual stress is hybrid integrated with the interface circuit using ic nude chip . so the density of the package is increased , and the noise of the sensing system is decreased . these found the base of capacitive accelerometer module using the mcm method 该传感器制作工艺简单，灵敏度高，支撑梁采用u型，减小了刻蚀后的残余应力，用玻璃作为衬底，减小了衬底和硅可动质量块间的寄生电容，且把传感器芯片和用ic裸片制作的接口电路集成在一起，提高了封装密度，减小了传感器系统的噪声，为采用mcm技术制作电容式加速度传感器模块打下了基础。
	4.	At this time , the approximate mechanical model of devices has been put forward , which frequency is 70 mhz , then we analyzed the euler ? bernoulli equation , find that the frequency is determined by the resonator ’ s density thickness and length ; the free - free - beam 、 coupled beam 、 support beam 、 transducer have been designed ; the model was simulated and modal analyzed on the coventorware and were consistent with the designed parameter . the silicon surface microfabrication process was developed and emphatically introduced several key surface microfabrication technologies , and was simulated by coventorware 本文通过分析欧拉-贝努立方程,得出滤波器的共振频率主要由谐振梁的密度、厚度和长度决定,考虑切变形和转动惯量的情况下,完成微机械谐振梁、支撑梁、驱动电容的设计;在coventorware软件上进行仿真,分析结果与理论设计比较好地吻合;对微机械滤波器的加工工艺进行设计,给出器件的完整的工艺流程,重点介绍微机械表面加工工艺,并在coventorware上进行仿真。

Similar Words：

"支撑缆索" Chinese translation, "支撑类" Chinese translation, "支撑篱笆" Chinese translation, "支撑力" Chinese translation, "支撑力 支持力 吸持功率" Chinese translation, "支撑梁z" Chinese translation, "支撑良好的,承重良好的" Chinese translation, "支撑轮" Chinese translation, "支撑螺栓" Chinese translation, "支撑螺栓窗口" Chinese translation