| 1. | This depends on the estimation of the temperatures generated by frictional heat .
它取决于摩擦热所引起的温度估算。 |
| 2. | Influence of thermal bow on the stability of rubbing bearing - rotor system
摩擦热弯曲对转子稳定性的影响 |
| 3. | Feasibility analysis on usage of friction heat to transport crude oil in buried hot oil pipeline
埋地热油管道利用摩擦热进行原油输送的可行性分析 |
| 4. | When the loading is constant , the abrasion heat rises as the rotating speed rises
法正常工作如负载不变时，摩擦热随着轮转速的增高而增大，极限情况下甚至 |
| 5. | Environment temperature doesn t include the heat rising caused by abrasion heat generated by running
环境温度不包括由于运转而产生的摩擦热使轴套温度的升高。 |
| 6. | The limit using temperature of mc nylon is 120 , the gear can t work correctly if the temperature exceeds 120
Mc尼的使用温度极限约120 ，当摩擦热引起的温度上升超过此极限时，轮将无 |
| 7. | The result shows that it is mainly caused by the martensite with high hardness produced after rail absorbing frictional heat
断裂的主要原因是钢轨在吸收摩擦热后产生了高硬度的马氏体。 |
| 8. | The friction heat in spindle bearings has obvious influences on the speed and dynamics , and is an important reason to limit machining tools for higher speed and precision
主轴轴承的摩擦热显著影响主轴单元的速度和动力学性能，是制约提高加工效率和精度的主要因素。 |
| 9. | The biggest fuel savings achieved by a full hybrid vehicle derives from regenerative braking , a technology that captures as electrical power much of the energy normally lost as frictional heat
高量级混合车最大的省油关键来自再生制动（煞车）技术，这种技术可捕集摩擦热（通常几乎散失掉的能量）并转变成电力。 |
| 10. | In chapter 3 , it systematically analyzes the bi - dimensioned instantaneous temperature range state of piston , cylinder liner and piston rings when diesel engine type 4135 is considered under the normal friction heat
第3章系统地分析了4135柴油机在考虑摩擦热的正常工况下活塞、缸套和活塞环各部分二维瞬态温度的分布和状态。 |
