| 1. | Max . swing angle of steering pitman arm
转向摇臂最大摆角 |
| 2. | Swing angle , ring rig
凿孔深度钻架前后摆角 |
| 3. | On controlling double - oscillationed - axis - cutting - tool structural - virtual - axis machine tool
一种双摆角刀具结构虚轴机床的控制问题研究 |
| 4. | By experiment , the input - output characteristic of the liquid angular sensor is given
并通过实验，给出液体摆角传感器的输入?输出特性曲线。 |
| 5. | Comparison and design of two different deflection angle measurement system for a 2 dof laser scanner
两种二维激光扫描器摆角测量方法的比较和实现 |
| 6. | The equation of motion is linearized near the equilibrium position of the tethered mass system
基于小摆角假设,将系统运动微分方程在平衡位置附近线性化。 |
| 7. | The endpoint is similarly located by measuring clockwise from the starting point by the number of degrees in the sweep angle
定位终结点的方法与之类似，从起始点顺时针测量摆角的度数。 |
| 8. | While the maximal angle is just 88 of the famous flexible wrist of trallfa when the input angle are equivalent to it
而在输入摆角相同时，国外著名的trallfa柔性手腕的最大偏摆角度只有88 。 |
| 9. | If the sweep angle is greater than 360 degrees or less than - 360 degrees , the arc is swept by exactly 360 degrees or - 360 degrees , respectively
如果摆角大于360度或小于- 360度，则弧线将只分别扫过360度或- 360度。 |
| 10. | Abstract : the construction of the liquid angular sensor in the laser beacon is designed , the work principle and magnify circuit are analysed
文摘:对激光基准信标仪中所采用的液体摆角传感器的结构进行设计，分析其工作原理、放大电路。 |
