Chinese translation for "摆动从动件"
|
- oscillating follower
Related Translations:
谐和摆动: harmonic oscillation 摆动筛: oscilating screenoscillating riddleoscillating screenpulsating screenrocking sievesand shifterswing sieveswinging screenvibrating screen
- Example Sentences:
| 1. | Cam with oscillating follower
摆动从动件凸轮机构 | | 2. | Cam with oscillating fo
摆动从动件凸轮机构 | | 3. | Finally taking a cam mechanism with oscillating follower as an example the construc tion method of adaptive system has been explained
最后以摆动从动件凸轮机构为例阐释自适应系统的构造方法。 | | 4. | Discussinng the synthesis of cam - five linked mechanism for the given locus , and giving the detailed formulas by an example
摘要对实现预定轨迹的摆动从动件盘形凸轮五杆机构的设计进行探讨，并通过实例给出具体的解析设计公式和步骤。 | | 5. | Taking the meshing theory of conjugate curved surface as a foundation , utilizing array method of rotation transformation of vector , the meshing equation and contour surface equation of conical cam mechanism with swinging conical roller follower were analyzed and derived , and the calculation formula of pressure angle and synthetic curvature of the mechanism was presented , thus laid a solid theoretical foundation for enhancing the machining accuracy of conical cam , improving its processing method and achieved the integration of cam cad / cam
摘要以共轭曲面啮合理论为基础，运用矢量的旋转变换矩阵法，分析并推导了圆锥滚子摆动从动件圆锥凸轮机构的啮合方程和廓面方程，并给出了机构的压力角和综合曲率的计算公式，为圆锥凸轮加工精度的提高，改进其加工方法，实现凸轮cad / cam一体化奠定了坚实的理论基础。 | | 6. | This paper points out that the traditional design method about the disc cam mechanism with oscillating follower has some shortcomings , thus it proposes one new method - using the differential method and the optimum technology to get the best parameters of the disc cam mechanism with oscillating follower
摘要指出了传统设计方法在确定摆动从动件盘形凸轮机构设计参数时的诸多不足，提出了一种新方法采用微分法和最优化技术联合求解摆动从动件盘形凸轮机构的最佳设计参数。 | | 7. | This paper provides the general equations of the theoretical contour line and the actual contour line of roller translation follower and roller oscillating follower disc cam in the polar coordinates system and the rectangular coordinates system , respectively . the equations are not only fit for the different layouts of the relative position of follower and cam , but also fit for the different types of cam contour
分别给出了滚子直动从动件和滚子摆动从动件盘形凸轮的理论廓线及实际廓线在极坐标系与直角坐标系下的通用方程,它们对于从动件与凸轮相对位置的不同布局方式及凸轮轮廓的不同类型均适用 |
- Similar Words：
- "摆动锤" Chinese translation, "摆动锤碎机" Chinese translation, "摆动锤投影" Chinese translation, "摆动磁针" Chinese translation, "摆动磁针仪" Chinese translation, "摆动从动件凸轮机构" Chinese translation, "摆动弹簧箱" Chinese translation, "摆动刀架" Chinese translation, "摆动刀架轴销" Chinese translation, "摆动倒立" Chinese translation
|
|
|
