| 1. | For intermediate doses, the corresponding slant distances can be estimated by interpolation .
对于中间的剂量，可以用内插法把相应的斜距估计出来。 |
| 2. | The directions can be obtained by removing the quarter-wave plate and following the procedure for plane polarized light or by interpolation .
可将四分之一波片卸去，并按平面偏振光法或内插法来决定其主应力方向。 |
| 3. | Quadratic interpolation method
二次内插法 |
| 4. | Liquid hydrocarbons . dynamic measurement . proving systems for volumetric meters . part 3 : pulse interpolation techniques
液态烃.动态测量.容积计用校准系统.第3部分:脉冲内插法 |
| 5. | The conventional linear and circular interpolation in cartesian ( rectangular ) coordinates were supplemented by polar coordinates and helical interpolation
传统的笛卡尔的线形和环形内插法结合被极坐标和螺旋插补所补充。 |
| 6. | The results show that all the orders of the stress singularities at the interface edge can be determined precisely , and the related stress intenisity coefficients can also be determined by extrapolation method
计算结果表明，本方法可以精确地求得振荡应力奇异性次数，并且与奇异性对应的复应力强度系数也可以很方便地应用外插法得到。 |
| 7. | For this regime , the heat transfer is usually predicted by the linear interpolation or extrapolation of the results of turbulent and / or laminar regimes , associated with great uncertainty in the evaluation of the performance of heat transfer
现阶段人们在实际计算中，往往采用线性内插法或延伸湍流区和层流区传热曲线的方法，从而使结果存在很大的不确定性。 |
| 8. | In addition , in order to solve the differencing equations , feasible project is presented to deal with the first and second boundary conditions . finally , jacobi interation method is selected for the solution of the equation systems
为了实现内点离散方程组的封闭，本文就第一、二类边界条件在计算时的处理和边界外虚拟点的外插法求值，给出了可行的解决方案。 |
| 9. | In this scheme , hsv model & threshold segmentation method is used for contour line extraction , and the method combining automatic trace and manually trace is used for vectorization . finally , we use component interpolation to make dem data
设计方案中用hsv模型结合阀值分割法实现等高线提取，使用自动跟踪与手工相结合的方法完成等高线的矢量化，最后采用分量内插法生成dem数据。 |
| 10. | In view of the altitude problems of inspecting the weighted average ways of obtaining altitude and the advantages and disadvantages of moving surface interpolation method are talked about through comparison , with which the writer draws a conclusion that moving surface interpolation method is suitable to be applied for the dynamic state inspection places , , moreover the key technology about the dynamic slate inspection is also taken into consideration , which includes digital camera and types of camera lens , the cause of camera lens distortion and the fundamental determining principle , the gain of image coordinate and the realization of time synchronization
针对检定点高程问题，分析比较了获取高程的加权平均法和移动曲而内插法的优缺点，得出移动曲面内插法适合用于动态检定场的结论。特别是针对动态检定的关键技术给予了相关研究，内容涉及：数码相机及相机镜头的选型，相机畸变差产生原因及测定的基本原理，像片坐标获取以及时间同步实现，得出结论：利用gpsoem板的秒脉冲( 1pps )输出特性，能够实现两台数码相机与gps接收机时间同步，满足动态检定指标要求。 |
