| 1. | Analysis and calculation of the coefficient about arbitrary intersect angle of two cylinders in rotary kiln
回转窑两圆柱体任意交叉角接触压力系数计算 |
| 2. | Influences of the tube wall thickness reduction after hydraulic expanded joint on the residual contact pressure
液压胀接后管壁的减薄对残余接触压力的影响 |
| 3. | Subsoil ; analysis of contact pressure distribution under raft foundations ; explanations and examples of analysis
地基.在筏基下接触压力分配的分析.说明和分析示例 |
| 4. | The contact pressure distribution is significantly affected by many factors , such as tire characteristics , inflation pressure , axle load , tire tread patterns and types of pavement
影响轮胎接触压力的因素主要有轮胎结构类型、轮胎气压、负荷、胎面花纹类型和路面结构类型等。 |
| 5. | The summation of forces on extensor mechanism should be zero according to equilibrium rules of forces before and after total knee arthroplasty based on constant extensor moment
计算得到髌骨形位参数变化前后与伸膝机构相关的动力学参数，包括股四头肌力、髌韧带力及髌股关节接触压力的变化。 |
| 6. | In order to confirm the stress of the plastic screw gear , it is necessary to modify the straight design formula 1 and 2 , so as to compensate the contact pressure caused by different gear shape
为确定作用在塑料螺旋轮所受的应力，需要修改直轮设计公式1和2 ，以补偿二者之间形不同而所受的接触压力不同。 |
| 7. | Many recent researches have indicated that the contact pressure between tire and pavement is highly complex . it is different from the uniformly distributed vertical stress distributions traditionally used for pavement analysis
轮胎与路面间的接触压力具有很明显的非均布性，并不同与传统的路面结构分析中的圆形均布荷载。 |
| 8. | The test study change of the soil pressure , the touch pressure between pipe and soil , pore pressure , the movement of depth soil , the underwater level and the deformation of earth surface in process of pipe jacking
研究了顶管施工过程中引起的土压力、土体与管壁的接触压力、孔隙水压力、深层土体位移、地下水位的变化以及地表变形等的影响。 |
| 9. | The residue contact pressure will be decreased after temperature cycle , the higher the working temperature , the lower the residue contact pressure , which has been proved by experiment
研究表明，当复合管处于热加载状态时，复合管存在着极限工作温度；经过极限温度循环后，残余接触压力将减小，且极限温度越高，残余接触压力值越小；通过实验得到了验证。 |
