| 1. | Rolling bearings . specifications of vibration acceleration for tapered roller bearings
滚动轴承.圆锥滚子轴承振动加速度技术条件 |
| 2. | Detail specification of shock and vibration piezoresistive acceleration sensors for type ca - yz - 001
Ca - yz - 001型压阻式冲击振动加速度传感器详细规范 |
| 3. | 5 for operating the fuzzy controller has been done , in which it simulates dynamic response of the vibration acceleration for fuzzy interpolation control
在仿真研究中，借助matlab6 . 5仿真软件对模糊插值控制中振动加速度的动态响应进行了模拟。 |
| 4. | For a given aperture size and vibration acceleration , the relations between material flow , flow time and vibration frequency were studied by experiments
通过试验确定了在网孔孔径和振动加速度一定的情况下，物料流量与流动时间以及振动频率的关系。 |
| 5. | The results of simulation and test show that the semi - active seat suspension with fuzzy controller can markedly reduce the vertical vibration acceleration and hence improve the ride comfort of vehicle
仿真和台架试验结果表明，模糊控制策略能使该系统较好抑制垂直振动加速度，提高乘坐的舒适性。 |
| 6. | The safe distance of dynamic compaction to the exiting structures was determined according to the measurements of vibrating speed , vibrating acceleration , foundation displacement and deformation of structures
通过振动速度、振动加速度、地基位移、建筑物的变形等项目的监测来确定强夯的安全距离。 |
| 7. | The results showed the vibration transmitted to body can be deceased indistinctly with the designed berth . the vibration with pillow of buckwheat nut can decrease 25 % more than that with
分析结果表明，采用变刚度铺垫能够改善卧姿乘客的振动舒适性;采用荞麦皮填充的枕头减振能够比无枕时振动加速度减少25 %左右。 |
| 8. | Through the fundamental research of the blade destruction , the digital filter software , the monolithic integrated circuit system software and hardware , the vibration acceleration sensor realizes the vibration protection together
通过对叶片破坏形式的理论研究,由数字滤波软件、单片机系统软硬件、振动加速度传感器共同实现振动保护。 |
| 9. | The measured tangential force , tangential inertial force and normal vibration acceleration are decomposed using a discrete wavelet transform . the relation among these three dynamics state variables is investigated
利用小波变换技术对测量的切向力、切向惯性力和法向振动加速度进行分解，对这些动力学变量之间的相互关系进行了深层次的研究。 |
| 10. | Then the experiment platform of the hypoid gear system was set up , and the lateral , longitudinal and axial vibration response of the bearing and the vibration acceleration response on the surface of the gearbox were measured
搭建了准双曲面齿轮传动系统的实验平台，测量了准双曲面齿轮箱轴承座的横向、纵向和轴向振动响应和箱体表面振动加速度响应。 |
