Chinese translation for "拧紧螺栓"

to tight a bolt
totightabolt

Related Translations:

拧干:  wring out

拧牢:  ipr i be attached by screwing

拧下:  screw offscrewing outunscrewing

拧接:  screw together

拧动:  tn.pr tn.p cn. twist round make tighter by twisting

拧弯:  contort

拧松:  back-out; screw off; unscrew

拧起来:  fasten off

拧摆步:  merengue action

拧盖机:  lid tightenerscrew capping machine

Example Sentences:

	1.	High-strength bolts were inserted into the holes and tightened to a high preload level . 把高强度螺栓插入孔洞，同时拧紧螺栓达到高的预加载水平。
	2.	Add sealed shim between the two flanges and then lock down the bolt 安装时两法兰间需加密封垫片，然后均匀拧紧螺栓。
	3.	To tight a bolt 拧紧螺栓
	4.	Don t tighten the bolt too much to prevent the gear broken or cut caused by expansion 在装轮时不要过度拧紧螺栓，以免轮在正常运转状况下，因材料膨胀导致轮破裂或者螺栓被剪断。
	5.	The wire junction uses plugged bolt to insure its easy operation . it s small in volume and light in weight easy to be installed 2采用对接式接头，连接时需将连接排插入接头，拧紧螺栓即可体积小，重量轻，方便安装。
	6.	Insert special bolt into the preset hole of c form parts , where the bolt will be fixed into the threaded hole of wedge , then screw the bolt on with a socket spanner until the first nut drops 将专用螺栓插入c形无件预留孔与楔块的螺纹孔相连，用套筒扳手拧紧螺栓直到第一个螺帽自行断落。

Similar Words：

"拧紧管接头" Chinese translation, "拧紧铰接卡钳" Chinese translation, "拧紧力矩" Chinese translation, "拧紧螺钉的" Chinese translation, "拧紧螺帽" Chinese translation, "拧紧螺丝" Chinese translation, "拧紧螺丝, 增加压力" Chinese translation, "拧紧螺旋盖" Chinese translation, "拧紧瓶盖" Chinese translation, "拧紧头" Chinese translation