Mobile
Log In Sign Up
Home > english-chinese > "恒温水浴" in Chinese

Chinese translation for "恒温水浴"

aqueous thermostat
thermostatic waterbath


Related Translations:
恒温空气浴:  constant temperature air bath
恒温节流阀:  thermostatic evaporator pressure regulator
恒温燃烧室:  constant temperature combustor
恒温系数:  coefficient; constant temperature
恒温控制:  thermostat controlthermostatic controlthermostatical controltone'smostatic control
恒温反应器:  isothermal reactor
恒温化油器:  thermostatic carbureterthermostatic carburettor
恒温室:  constant temperature enclosuretemperature control chamberthermostatic chamber
恒温线:  isotherm
恒温性:  homeothermiahomoiothermyhomoiotrermy
Example Sentences:
1.The sample flask is immersed in a constant temperature bath .
将试瓶浸入恒温水浴中。
2.Return the electrode assembly to the constant temperature bath .
将电极装置放回恒温水浴
3.Digitalized revolution on medical thermostat water bath cauldron
医用恒温水浴锅的数控化革新
4.Electrically - heated thermostatic water bath
电热恒温水浴
5.Shaking water bath
振动型恒温水浴
6.At last , the catalyst with good performance were prepared as follows : mixed the metal ion and citric acid together by molar ratio of 1 : 2 , then the mixture was dissolved in 150ml water with original solution ph value of 5 . 0 to prepare the sol ; then the water in the sol was vaporized for 5h in water bath at temperature of 80 , and the gel is dried for 10h at the temperature of 90
最终确定催化剂最佳制备工艺为:金属离子与柠檬酸的摩尔比为1 : 2 ,溶于150m1蒸馏水中,初始溶液ph值为5 . 0 ,制备成溶胶,在80恒温水浴中蒸发5h得到湿凝胶, 90下干燥l0h得到干凝胶,最后在700烧结5h ,得到催化剂样品。
7.In this paper , the optimum conditions of catalyst preparation were found by studying the influences of the sol - gel process parameters on the crystal structure of the nanometer la1 - xsrxmno3 , such as the value of ph , the temperature of water bath , the drying method of gel and the sintering mode of sol . the catalyst with good performance were prepared as follows : mixed the metal ion and citric acid together by molar ratio of 1 : 2 , then the mixture was dissolved in 150ml water with original solution ph value of 0 . 5 to prepare the sol ; then the water in the sol was vaporized for 5 . 5h in water bath at temperature of 80 , and the gel is dried in vacuum for 10h at the temperature of 100
研究了溶胶凝胶制备工艺中ph值、水浴温度、凝胶干燥方法和烧结方式对纳米la _ ( 1 - x ) sr _ xmno _ 3晶体结构影响,确定催化剂最佳制备工艺为:金属离子与柠檬酸的摩尔比为1 : 2 ,溶于150ml蒸馏水中,初始溶液ph值为0 . 5 ,制备成溶胶,在80恒温水浴中蒸发5 . 5h得到湿凝胶,真空100下干燥10h得到干凝胶,最后在700烧结3h ,得到催化剂样品。
Similar Words:
"恒温双金属制螺旋线圈的坏扭转率的试验方法" Chinese translation, "恒温水槽" Chinese translation, "恒温水混合开关组合件" Chinese translation, "恒温水箱" Chinese translation, "恒温水循环装置" Chinese translation, "恒温水浴锅" Chinese translation, "恒温水浴振荡器" Chinese translation, "恒温体" Chinese translation, "恒温条件" Chinese translation, "恒温条件下从恩氏粘度计中流出200" Chinese translation