| 1. | The shuttle plate and parts in this area at the front of the machine should be well dried and a little oil applied to prevent any rust .
机器前面的梭形板及位于该处的各个零件应仔细擦干并加少量的油，以防生锈。 |
| 2. | Feedback - decoupling for a combined shape and gauge control system in hot strip rolling
热轧带钢板形板厚反馈解耦控制 |
| 3. | Cfd techniques for the design of plate - fin heat exchangers with plain fins and serrated fins
技术在平直和锯齿形板翅式换热器设计中的运用 |
| 4. | For installations on lapped - type siding , a siding wedge is supplied to give a finished look
对于倒齿滑动安装，要配置一个侧面楔形板，美化外观。 |
| 5. | Dtu 40 - 45 . building works . roof covering made of copper sheet and long sheet . part 1 : technical specifications
Dtu 40 - 45 .建筑工程.铜板和长形板制屋顶覆盖物.第1部分:技术规范 |
| 6. | Dtu 40 . 45 - building works - private contracts . roof covering made of copper sheet and long sheet - part 2 : special clauses
Dtu 40 . 45建筑工程.专门合同.铜板和长形板制屋顶覆盖物.第1部分:特殊条款 |
| 7. | Profiled sheeting made of coated or non - coated steel sheet and panels . bending tests under linear loads and or under concentrated loads
有涂层或无涂层钢制成形板.线性荷载和或集中荷载下的弯曲试验 |
| 8. | The mud flap assembly according to claim 1 wherein said mud flap defines an elongated recess accommodating said elongated support member
根据第一条要求来看，挡泥板总成中的挡泥板可以理解为一个可伸缩（伸缩式）的凹形板装配到一个也可伸缩的支撑件上。 |
| 9. | The product series include low - side right angle panel , high - side right angle panel , c type bar button , h type bar button , c type rectangular bar button , 84r bar button the carriers and suspended pieces are the same as spray finishing series and roller series
产品分矮边直角形板，高边直角方形板c型条扣h型条扣， c型直角条扣84r条扣骨吊件部分与喷涂，滚涂系列通用。 |
| 10. | The contents of the thesis are summarized as follows : 1 . by using curved - fitting method , calculation of local angular deflection of canvas plate is studied , with the help of cubic spine function , canvas plate is formed and then its local angular deflection is worked out . 2
本文所做的工作概括如下： 1 、运用曲面拟合方法研究帆形板局部角变形的计算方法，通过三次样条函数建立船体帆形外板，然后计算得出帆形板的局部角变形。 |
