Chinese translation for "开口端"

open end
open-end
soft end

Related Translations:

单开口:  single enttry entry

开口对接:  gap buttopen butt joint

中立开口:  open center

开口部位:  position of opening

上开口:  upper shed

净开口:  clear opening

开口坩埚:  open pot

喇叭开口:  flare opening

内部开口:  internal opening

开口宽度:  width of jaw opening

Example Sentences:

	1.	Wrenches , box , open end , combination , and flare nut inch series 扳手工具箱开口端结合部和扩口螺母
	2.	Press stem / ball into valve body and remove from open end 将阀杆/球体压入阀体内，并且从开口端卸下来。
	3.	Wrenches , box , angled , open end , combination , flare nut and tappet metric series 斜开口端和套筒组合式螺帽和梃杆扳手
	4.	Adj externally molded onto the body to indicate the open end used for assembly 调整)模铸在阀体的外部，表示用于组装的开口端口。
	5.	The open end of the filter was subject to thermal stress during the back pulse process 反吹时，滤管开口端附近最容易受到热应力的冲击。
	6.	Engineers wrenches , double head , open end , with unequal jaw widths ; test torques series d 工程师用扳手钳口宽度不相等的开口端双头扳手. d系列
	7.	Comparing with the stationary straight pipe , the entry length becomes larger 由于旋转和曲率的影响，旋转曲线管道的开口端长度相比较直管而言大大增大。
	8.	With the help of five others who joined the newly formed company , chan fabricated a series of upright posts , each spaced a few tens of nanometers apart , at the mouth of a channel down which the dna was to travel 在另外五位加入新公司的人员协助下，陈恩浩制造了一系列的直立装置，彼此间隔只有几十奈米宽，放在dna将要通过的管道开口端。
	9.	At the entrance of the rotating curvilinear pipe , both the development of flow structure and temperature distribution depend on f and the characteristic quantities of flow and heat transfer change obviously 在曲线管道的开口端，流场结构的发展过程与f密切相关，开口端各流动特征量变化十分显著。管道的摩擦系数比沿轴向变化与入口类型以及旋转条件密切相关。
	10.	For example an open ended 9 / 16th wrench is very similar to a 9 / 16th 6 - point closed - end wrench but the 6 - point closed end wrench is far better suited for removing extremely tight and even stuck nuts and bolts than is an open - ended wrench of the same size 举个例子，一个开口端是9 / 16的扳手，它与闭锁式的9 / 16 . 6的扳手非常相似，但是差6个点的扳手远远要比能拧得很紧的扳手要好用的多，一个能粘装订书的工具要比一个开口端的扳手要好用得多。

Similar Words：

"开口定单" Chinese translation, "开口定位圈" Chinese translation, "开口订单" Chinese translation, "开口订货单" Chinese translation, "开口度" Chinese translation, "开口端平面" Chinese translation, "开口锻模" Chinese translation, "开口断层" Chinese translation, "开口对焊" Chinese translation, "开口对接" Chinese translation