This extended stored procedure is used to read from the registry 这个扩展过程可以度曲注册表特定的键里特定的值。
3.
Grain size curve 粒度曲线
4.
From result of simulation and test , the sled deceleration curves are almost same 结果表明，仿真的台车减速度曲线与试验的台车减速度曲线基本吻合。
5.
It has dark color , fruit flavor , increasing rock flavor , long and clear fruit aftertaste , increasing sweetness , declining sourness , heavy , but a bit of unsmooth , deep aftertaste , full taste 色偏深,果香,石头味上扬,回味果香清冽持久,甜度曲线上升,酸度下降,更加厚重但有点涩,回味很深,口感非常充分
6.
Based on the test results , the ultimate load - carrying capacity , mode of failure , cracking behavior and load versus mid - pan lateral deflection curves of the strengthened specimens are summarized and analyzed 在试验的基础上，对加固构件的极限承载力、破坏形态、裂缝分布以及荷载跨中桡度曲线等进行了总结和分析。
7.
Paper ' 21 has adopted this method in the cantilever beam and simple beam ' s crackle discerning . the result indicates that modal flexibility curve is easy and just needing few calculating amount 文献等在悬臂梁和简支梁的裂纹识别中采用了该方法，结果表明，柔度曲率法具有计算量小和简便易行的优点，而且仅需要低阶模态信息即可获得很好的精度。
8.
Set up analysis models of solar and wind energy equipment in economy according to the local solar energy resource , then confirms the input of solar energy equipment and wind energy equipment through optimization calculation 根据当地的资源状况模拟一条太阳能辐照度曲线,并以此建立太阳能风能经济性分析模型,通过最优化计算确定太阳能设备与风能设备的投入。
9.
Indicated by relevant documents , up to now , the method of modal flexibility curve has not applied to crack identification of the plane frame crackle of structure . so this thesis utilize this method to discern the plane frame structure crackle firstly 有关文献表明，迄今为止，柔度曲率法尚未应用于平面框架结构的损伤识别。因此，本论文利用该方法对平面框架结构的裂纹识别问题进行了初步探讨。
10.
The qualification of multipactor and the characteristic of the angle and velocity of secondary electron were study . bring forward a improved model of multipactor and solve it by a random sample made by monte carlo , as a result , a critical curve of multipactor was gained 提出了一个改进型的次级电子倍增研究模型,利用蒙特卡罗法生成的随机样本来求解这个模型,得到了工作在2 . 85ghz的介质片的次级电子倍增敏感度曲线。
