| 1. | Plastic deformation takes place first at the crack tip and spreads across the solid as the applied load is increased beyond general yielding .
塑性变形首先发现在裂纹顶端，当工作载荷超过了普通屈服时，则传播到物体中。 |
| 2. | Working loads and failure problems were analysized
分析了焊接球罐的工作载荷及失效的特点。 |
| 3. | Packaging - pallets for materials handling - part 2 : working load
包装.物料运输用托盘.第2部分:工作载荷 |
| 4. | Rated operating load for loaders
装载机额定工作载荷 |
| 5. | Safe - working load
安全工作载荷 |
| 6. | Hearingbone - weave which results in a very high wear - resistance and a high degree of self - recovering properties
每一吊带都印有工作载荷安全数。 |
| 7. | Entertainment technology - load assumptions in stages and associated areas - safe working loads
娱乐技术.舞台和相关区域的载荷能力.安全工作载荷 |
| 8. | Earth - moving machinery - loaders - part 5 : calculation and verification methods for rated operating loads
运土机械.装载机.第5部分:额定工作载荷的计算和验证方法 |
| 9. | Analysis results indicate : shroud tightness is determined by pre - twist angle of shroud and working load , the centrifugal force plays a main role to the tightness change
分析结果表明，叶冠的紧度由预扭角和工作载荷决定，离心力对紧度的变化起主要作用。 |
| 10. | At last of the paper , build the test table of the high speed bearing . test and collect the data of temperature and vibration of the bearing in high speed
本文最后通过试验研究的方法对轴承在不同转速、不同工作载荷下的工作温度和轴系振动进行了测量和分析。 |
