| 1. | Max of length of sliding and adjusting : 350mm
最大工作行程: 350mm |
| 2. | Let me get this straight . i change my schedule to meet you
我跟你直说吧,为了见你我改了所有的工作行程 |
| 3. | Working stroke of sring buffer
弹簧缓冲器工作行程 |
| 4. | Working stroke of oil buffer
油压缓冲器工作行程 |
| 5. | 2 . the direct - contacting type limit switch has a working travel about 7 - 10mm
2直碰式限位开关的工作行程约7 100mm 。 |
| 6. | Working travel mm
工作行程mm |
| 7. | Analysis and calculating to impacting stress and stroke of the impacting hammer in the striking of a pile hammer
桩锤撞击过程中冲击应力及夯锤工作行程的分析与计算 |
| 8. | It can meet the requirements under the condition without loads . the working stroke is 6mm . and the stepping frequency is 300times / minute
在空载的情况下，已基本能达到所要求的性能，其工作行程可达6mm ，步冲频率可达300次分。 |
| 9. | Considering that the smallest transmission angle could not reflect overall power transmission ability of whole mechanism , this paper indicates that finding the optimum power transmission efficiency while trying to make the mechanism compact is significantly important
摘要针对机械的最小传动角不能反映机构的总体传力性能的缺点，提出只要找出机构工作行程中的最佳传力效率系数，并尽量使设计的机构紧凑，才具有重要的实用意义。 |
| 10. | In order to guarantee the request of accuracy of the work piece , all the series radial riveting machine are can add the tiny - scale device , the scale regulator are divided three kinds of specifications , they are 20mm , 30mm and 60mm . the different number representative different stroke of power head . each of scale representative the perpendicular distance 1 mm
为保证铆接加工精度的要求，我公司可为客户提供加装刻度调节的服务，现将刻度盘的参数规格公布如下，标尺可分为20mm 30mm 60mm三种规格，分别对应不同工作行程的机型，每刻度代表1mm的垂直距离。 |
