Mobile
Log In Sign Up
Home > english-chinese > "导流管" in Chinese

Chinese translation for "导流管"

honeycomb duct
shroud
thrust-augmenting nozzle


Related Translations:
导流塔:  diversion tower
导流通风:  id inducted draft
导流套:  battle
导流水槽:  diversion flumepilot channel
导流段:  guide passage
导流方法:  diversion methodmethod of diversionmethod of river diversion
分导流:  shuntingsplit flow
施工导流:  construction diversion
导流渡槽:  diversion aqueduct
导流台地:  diversion terrace
Example Sentences:
1.Your baby isn't strong enough to suck, so we have to use intubation .
你的宝宝还无法吞咽东西,所以我们使用导流管
2.Drainage catheters and accessory devices
导流管和辅助设备
3.500kw rudder propeller harbour tug
500kw导流管港作拖船
4.Technical requirements for making and working of fishing vessel honeycomb duct
渔船导流管拜制造及安装技术要求
5.Hot air duct
热空气导流管
6.The conclusions are drawn as following : 1 . regularity of fabrication in aluminum matrix composite ring - shaped performs with large dimensions and effects of parameters were investigated , based on the novel crucible movable spray deposition technology and equipment . the optimal parameters are that the diameter of the delivery tube is 3 . 8mm , spray gas pressure is 0 . 8mpa , spray height is 200mm , and transferring pressure of sic is 0 . 5mpa
通过系统的实验研究得到如下结论: 1 .基于新型的移动坩埚自动化控制喷射沉积环坯制备技术及装置,研究了大尺寸铝基复合材料环坯的制备规律,讨论了喷射沉积工艺参数对沉积坯形成过程的影响,得到了最佳工艺参数:导流管直径d = 3 . 8mm ,雾化气体压力p = 0 . 8mpa ,喷射高度h = 200mm , sic颗粒输送压力p送= 0 . 5mpa 。
7.The optimal parameters of making high silicon content aluminum alloys is : spray height is 220 - 230mm , spray angle is 30 ? the scanning velocity of atomizer is 30mm / s , the original offset of the substrate is 30mm , rotation velocity of the substrate is 120rpm , spray gas pressure is l . ompa , the diameter of the delivery tube is 3 . 6mm , the drawing velocity of the substrate will be adjusted on - line with a plc on the basis of the spray
通过对多层喷射沉积原理及工艺参数的研究,得出制备al - 22si - 3cu - 1mg合金的最佳工艺参数为:喷射高度为220mm - 230mm ,基底转速为120rpm ,雾化器扫描速度为30mm / s ,基底下降转速依据喷射情况由智能控制器进行实时调整,喷射角度为30 ,初始偏心距为30mm ,导流管直径为3 . 6mm ,雾化气压为1 . 0mpa 。
8.In the part of detector , it mainly introduces the design of liquor tubes , heater , pressurize , and thermocouple ; in the part of controller , this design uses tms320lf2407 as the cpu . the design part mainly introduces controller circuit design which mainly contains data collection circuit , prepositive magnifying circuit , a / d convert circuit , failure self - diagnosis circuit , the tms320lf2407 interface circuit , temperature control circuit , display circuit , 4 ~ 20ma standard signal output circuit ; in the software part , it mainly introduces software chart of main program and partly linearization subprogram design
检测器部分重点介绍了导流管的设计、加热器的设计、密封技术的设计以及测温电路的设计;控制器部分以tms320lf2407为核心,重点介绍了控制器电路设计,主要包括数据选择电路、前置放大电路、 a / d转换电路、故障自诊断电路、 tms320lf2407接口电路、控温电路、显示电路、 4 20ma标准信号输出电路共八个部分;软件设计重点介绍了主程序软件设计及分段线性化子程序设计。
Similar Words:
"导流阀" Chinese translation, "导流方法" Chinese translation, "导流格栅" Chinese translation, "导流工程" Chinese translation, "导流沟" Chinese translation, "导流管舵" Chinese translation, "导流管厚度弦长比" Chinese translation, "导流管螺旋浆" Chinese translation, "导流管式螺旋桨" Chinese translation, "导流河" Chinese translation