| 1. | P . box anvil , used to secure parallel specimens
砧板盒,用来安放双面平行的实验样品 |
| 2. | Last , samples prepared for experiment are introduced
最后,研究了实验样品的制备过程。 |
| 3. | Therefore , it is applicable for research into the films in the laboratory
尤其适用于各种涂镀膜实验样品的研究分析。 |
| 4. | Finally , the sample was characterized by xrd , sem methods
最后，采用xrd 、 sem等测试分析手段，对实验样品进行检测分析。 |
| 5. | 5 . examine the factual space of the experimental vls grating sample
5 、对变栅距光栅的实验样品进行了栅距的实际检测。 |
| 6. | Chapter one is a survey of thz radiation , including the character of thz radiation , the generati
人dxted单晶产生thz辐射的特性研究，包括研究背景、实验样品、实验测量、结果及分析、结论等五个部分。 |
| 7. | 5 . study is carried out to develop the relevant technology design and technology research . a prototype of such sensor is fabricated
5 、进行了传感器的工艺设计和工艺研究，成功地研制出了传感器实验样品。 |
| 8. | The accuracy of the temperature control is less than 1 . 5 the temperature distribution on the cryostage is analyzed with the numerical method
对低温台温度场的分布情况进行了数值分析。计算中采用了焓法解决实验样品层的相变问题。 |
| 9. | It is proved by the simulation that the temperature of samples can be estimated from the thermo - couple placed on the cover glass and the planar temperature distribution of the cryostage is approximately uniform
分析结果表明：可以利用布置在盖玻片上表面的热电偶测量并推算实验样品层的温度；低温台载物表面温度均匀。 |
| 10. | The math model of co - sedimentation is established and the calculation results are gained . in contrast with the experiment results , some advices about the fabrication are supposed to w - mo - ti fgm
结合本实验样品的制备方法建立共沉降数学模型，通过计算结果和实验结果的比较，对金属/金属梯度功能材料的制备工艺提出了调整意见和措施。 |
