| 1. | Structural steel sections - specification for hot - rolled sections
结构钢型材.热轧型钢的规范 |
| 2. | Dimensions , mass and permissible variations of hot rolled steel sections
热轧型钢的尺寸质量及其允许误差 |
| 3. | Caigang composite panels , caigang watts , c payments processing wholesale and retail
彩钢复合板、彩钢瓦、 c型钢的加工批发零售。 |
| 4. | Specification for cold - formed welded and seamless carbon steel structural tubing in rounds and shapes
圆钢与型钢的冷变形焊接与无缝碳素钢结构管规范 |
| 5. | Eps sandwich panels , colour pressure xingban , c payments , the production and installation of z deficit
Eps夹心板、彩色压型板、 c型钢、 z型钢的制作及安装。 |
| 6. | Carbon channel is usually finished with electro - galvanization . hot dipped galvanzined finish or epoxy coating or nigrescence is also available on special order
碳钢型钢的表面处理普通为电镀，如需热浸镀锌、喷塑、发黑等要在订货时说明。 |
| 7. | The suggestion is put forward that adopting the different geometry control condition between rolled h - section steel beam and general i - section steel beam
本文提出轧制h型钢的几何控制条件，并建议将一般工字形截面简支梁和轧制h型钢梁分列处理。 |
| 8. | Allow plate thickness and standard deviation shall meet the requirements for their products . beam deviation should be allowed to meet the size and specifications of their products standards
钢板厚度及允许偏差应符合其产品标准的要求.型钢的规格尺寸及允许偏差应符合其产品标准的要求 |
| 9. | The national steel structure design code ( gbj17 - 88 ) is not permitted the b / t exceed ( 10 + 0 . 1 ) 235 / fy . the width - thickness ratio of the web ( b / t for short ) exceed the limitation often
钢结构设计规范( gbj17 - 88 )规定t形截面轴压构件腹板宽厚比不应超过( 10 + 0 . 1 ) ，按国家标准生产的t型钢的腹板宽厚比大多超过限值。 |
| 10. | It is mainly used for surface treatment ( namely preheating , rust removal , paint spraying and drying ) of steel plate and various structural sections , as well as for cleaning and strengthening of metal structural parts
主要用于钢板和各类型钢的表面处理（指预热、除锈、喷漆、烘干）亦可用于金属构件的表面抛丸清理和强化。 |
