Chinese translation for "固支梁"
|
- built-in beam, clamped-end beam
clamped beam
Related Translations:
固: Ⅰ形容词(结实; 牢固; 坚硬) firm; hard; solid 短语和例子坚固 strong; 稳固 firm; stable; 本固枝荣。 when the root is firm, the branches flourish.Ⅱ副词1.(坚决地; 坚定地) firmly; resolutely 短语和例子固请 firmly invite; 固辞 resolute 固 固界面: solid solid interface
- Example Sentences:
| 1. | Static deformation of a beam with directional attached piezoelectric elements
用固支梁挠度曲线模拟高速路基本超车过程 | | 2. | Analytical solution for fixed - end orthotropic beams subjected to uniform load
均布载荷作用下正交各向异性固支梁的解析解 | | 3. | Analytical solution for fixed - fixed anisotropic beam subjected to uniform load
均布荷载作用下两端固支梁的弹性力学解析解 | | 4. | Elastic analysis of rectangular thin plate constrained with beam under local uniform load
均布载荷作用下各向异性固支梁的解析解 | | 5. | The elastic mechanics solution of statically indeterminate beams fixed at two sides under the action of concentrated load
集中荷载作用下两端固支梁的弹性力学解 | | 6. | In the experiment , the author get many conclusions on the fixed beam strengthend by the two means through analysing the experiment result , including strain , displacement , angle of rotation and damage character
通过对试验梁应变、挠度、转角、破坏特征等方面的分析研究得出了许多关于这两种方法加固固支梁的结论。 | | 7. | An analytical expression of pull - in voltage for a doubly - clamped multi - layer beam with different widths under an electrostatic load is obtained by using the energy method , and is fitted by the numerical analysis . it is the first time to get the analytical expression with error less than 2 . 5 %
本文采用静电执行结构，结合运用能量法对多层不等宽两端固支梁吸合电压进行分析，得到多层不等宽两端固支梁吸合电压的解析表达式，并用数值方法对其进行拟合修正，首次得到了误差小于2 . 5的解析式。 | | 8. | Since the pull - in voltage is related to material properties and geometry of the beam , a novel extracting method for material properties of the multi - layer film based on designed beams with different widths is presented for the first time and related matlab scripts have been programmed . comparison of results from the analytical expression and those from coventorware shows that they agree with each other great well
由于吸合电压与梁的材料参数和几何尺寸有关，可由吸合电压与梁材料参数之间的关系来求解材料参数，在此基础上，首次提出了一种通过不等宽两端固支梁的吸合电压提取多层材料残余应力、弹性模量的方法，用matlab编写了有关的程序。 |
- Similar Words：
- "固载杂多酸树脂催化合成苯甲醛正己硫醇缩醛" Chinese translation, "固粘性" Chinese translation, "固镇" Chinese translation, "固阵" Chinese translation, "固支" Chinese translation, "固脂" Chinese translation, "固执" Chinese translation, "固执,不屈服的" Chinese translation, "固执保守的" Chinese translation, "固执到底" Chinese translation
|
|
|
