| 1. | Dimensions for mounting and connection of injector nozzle
喷油嘴偶件.型式及连接尺寸 |
| 2. | Technical specification for fuel injection nozzles of diesel engines
柴油机喷油嘴偶件技术条件 |
| 3. | Delay pintle catibrating injection nozzle
轴针式标准喷油嘴偶件 |
| 4. | Measures to prolong life time of fuel injection nozzle couple parts for diesel engine
延长柴油机喷油嘴偶件使用寿命的措施 |
| 5. | The valve of ejection nozzle is an important part in the diesel engine ; its processing quantity will directly affect the amount of the oil usage and the exhaust let off by diesel engine
喷油嘴偶件针阀体是柴油发动机上的重要零部件，它的加工质量优劣将直接影响到柴油发动机的油耗以及废气的排量。 |
| 6. | All these characteristic can satisfy the demand of the factory . by using this system can change the laggard situation of the manual separation of injector valve and orifice
能满足喷油嘴偶件生产厂家对喷油嘴偶件针阀、针阀体自动分选精度，速度的要求以及对成本投入的要求，改变手工分选的落后局面。 |
| 7. | 10 . no assembly warranty will be delivered if such assembly as plunger , oil delivery valve assembly and nozzle assembly are worn out abnormally , because the customers use diesel oil which is not in conformity with quality demand or dirty diesel oil
因顾客使用不符合质量要求的柴油，或柴油太脏，导致柱塞偶件出油阀偶件喷油嘴偶件异常磨损的，偶件不给予保修。 |
| 8. | The project is funded by the anhui oil pump and oil nozzle factory . the aim of this project is to develop the automatic separation system of injector valve and orifice , based on the pneumatic sensor and the mcu
本课题来源于安徽油泵油嘴厂，目的是研究一套价格为企业所接受的基于气动传感器并以单片机进行数据处理和控制的喷油嘴偶件针阀和针阀体自动测量分选系统。 |
| 9. | The service condition of diesel injector nozzle is introduced , the failure reasons of diesel injector nozzle are mainly analyzed , the quality of diesel injector nozzle is improved and the useful life way of diesel injector nozzle is extended
摘要介绍了喷油嘴偶件的服役条件，分析了喷油嘴偶件失效的原因，对提高喷油嘴偶件质量和延长喷油嘴偶件使用寿命的途径进行了探讨。 |
| 10. | Pneumatic and automatic separator of injector valve and orifice is based on pneumatic measurement and 8051 mcu , which is used for data processing and control . it can automatically separate injector valve and orifice , whose nominal size is 6 and tolerance is + 10u , with the interval of 1u , accuracy of 0 . 5u and speed of twenty pieces per minute around . the automatic separation system of injector valve and orifice has low cost , high separation accuracy , high separation speed and easy operation
使用气动喷油嘴偶件针阀、针阀体自动分选系统能实现对公称尺寸为6 、公差为10的喷油嘴偶件针阀、针阀体按1分选间隔、 0 . 5分选精度的自动分选，分选时的速度可达每分钟20件左右。 |
