Chinese translation for "啮入"
|
- a roach action
approach action
approach, engaging-in
engaging-in
Related Translations:
啮: 动词[书面语]1.(鼠、兔等用牙啃或咬) gnaw (at) 短语和例子这包米给鼠啮虫咬了。 this sack of rice was destroyed [bit] by rats and insects.2.(侵蚀) erode 啮出: rece actionrecess actionrecess, engaging-out 失啮: drop out of geardrop-out of gear 啮出弧: arc of recessrecess arc
- Example Sentences:
| 1. | Using method of modes accumulation and continuity of displacements and velocities of components in mesh stiffness change , system vibration was calculated
采用模态叠加法和系统在轮齿啮入及啮出时位移和速度连续的条件，获得系统动响应。 | | 2. | It means that the maximum friction force is at the positions of neither the approach nor the recess point , which is an original conclusion of this paper
这就意味着最大摩擦力并非出现在啮入点和啮出点，这是本文具有创新意义的一个结论。 | | 3. | In odontoid chain drive , the chain bears a periodical alternating load , in which the impact load produced while the link meshes into the tooth of sprocket makes comparatively big effect
摘要在齿形链传动中，链条承受周期性的交变载荷，其中链节啮入轮齿时产生的冲击载荷影响较大。 | | 4. | The third , the vibration theory of chord is applied to establish the model of the ramming system . the chain organ ' s polygon effect and it s meshing impact are involved in the model . the transverse vibration of the ramming system is analysed for the solution
运用弦振动理论建立了描述供弹机横向振动的理论模型，计及了链传动机构固有的多边形效应和啮入啮出冲击效应，计算获得了方程的数值解，描述了该机构的横向振动特性。 | | 5. | Translation modes are similarly independent of the rotational support stiffnesses . large contact ratio do not mean lower mesh force . if either the number of sun or ring gear is not multiple of planet gear , system will run effectively , with lower impaction of tooth mesh in and out
研究表明：扭转支撑刚度的变化影响系统的转动模态，径向支撑刚度(行星架的除外)的变化影响系统的位移模态；齿轮间重合度大并不等于轮齿间的受力情况好；行星轮与内齿圈齿数不为行星轮个数的整数被时，轮齿的啮入、啮出对系统的冲击小，系统的效率高。 | | 6. | By means of researching the meshing impact in the engagement of standard chain respectively with the spur toothed sprocket and the involute toothed sprocket , it has been discovered through analysis that by adopting the involute tooth for the sprocket could reduce the normal impact velocity in the engaging instant of chain and sprocket , thus lowered the meshing impact among chain and sprocket
通过研究标准链条分别与直齿链轮和渐开线齿链轮啮合的啮合冲击，分析发现在链轮上采用渐开线齿能减小链条与链轮啮合瞬间的法向冲击速度，进而降低链条与链轮的啮入冲击。 |
- Similar Words：
- "啮毛虱立克次体" Chinese translation, "啮毛虱属" Chinese translation, "啮毛虱属,嚼虱属" Chinese translation, "啮毛癖" Chinese translation, "啮切牙, 啮门齿" Chinese translation, "啮入弧" Chinese translation, "啮入接触" Chinese translation, "啮入相位" Chinese translation, "啮舌" Chinese translation, "啮虱属" Chinese translation
|
|
|
