| 1. | For example , i inhaled air and circulating water cooling tower
例如空气吸入口及循环水冷却塔等。 |
| 2. | The result certifies that the suction system design is reasonable
结果表明：给水泵吸入口系统设计是合理的。 |
| 3. | Margin waste suction inlet in lower suction method , computerized automatic positioning
纸边废纸吸入口采下吸式.电脑自动定位 |
| 4. | Both suction and discharge nozzles are horizontal , which has simplified the connection of pipeline
泵吸入口和吐出口均水平方向，简化了管路的连接。 |
| 5. | Equally effective in checking back flows from head pressure on the discharge or suction sides of pump
无论是泵的排泄口的排出压力，还是泵的吸入口，其流体止回的效果都是相同的。 |
| 6. | Suction piping for all pumps shall have at least five ( 5 ) times the nominal pump suction flange diameter of straight pipe upstream of the suction nozzle
所有水泵的吸水管道直径至少应有5倍于吸入口的上升直水管段的额定边缘直径。 |
| 7. | For pump with open impeller , the diameter of solid particle in the liquid to be delivered should better not exceed the 30 % of the suction diameter of the pump
采用开式叶轮的泵，被输送液体中含有的固体颗粒直径不超过泵吸入口直径30 %为宜。 |
| 8. | For multistage style , its suction nozzle and discharge nozzle can be installed to the same direction , or to different directions by 90 , 180 and 270 according to actual needs , thus to meet different connection conditions
多级式可根据需要，吸入口和吐出口可安装成同方向或90 、 180 、 270几个不同方向以满足不同的连接场合。 |
| 9. | Note : discharge in position no . 1 furnished as standard . other positions avaliable from factory when specified . ( please advise required rotation & relative position of suction & discharge
注意：作为标准配置，排泄口位于1号位置( pos . 1 ) 。也可以安排在其它为止，但需要在订购时明确说明。 （请指明所需的吸入口和排泄口的旋转方向和相关位置。 ） |
| 10. | When the pressure in the tank is balanced with the atmospheric pressure , the exhalation valve flap of the respiration valve is closely cooperate with the exhalation outlet valve seat , the inhalation valve flap is closely cooperate with the inhalation outlet valve seat
当储罐内压力与大气压力平衡时，呼吸阀呼出阀瓣与呼出口阀座严密配合，吸入阀瓣与吸入口阀座严密配合。 |
